540333

Wyse - Dell CX0LE Manual

4
Zoom out
Zoom in
Previous page
1/5
Next page
4
7. Attach the cables to their respective connectors on the back panel of the thin client.
Caution
Do not connect power until all other connections are made.
8. Optional – Gather the cables together and with a user-provided tie wrap, secure to a
pre-drilled cable management tie hole (any unused hole provided) of the mounting
bracket.
Note
Attach the tie wrap in a security tie hole where it will not obstruct connectors,
power button, or other working parts of the thin client.
Monitor Mounting Configuration
Use these instructions to mount the thin client on most VESA standard monitors (see
Figure 4).
1. Remove the four horizontal feet from the thin client by sliding the feet towards the back
panel.
2. Install the four (4) M4x10 mm monitor mounting screws (provided) through the bracket
screw holes and thread them into the monitors’s preexisting mounting holes.
Notes
The bracket may need to be mounted horizontally with the connectors facing
down and the power button up, on the right or left.
When installing in the vertical position, place the thin client so that the power
button to the thin client is on the top.
Check with your monitor’s manufacturer for proper screw size and length
before assembling. If the four (4) M4x10 mm screws provided are not correct
for your bracket-to-monitor mounting requirements, user is to provide the
proper replacement.
3. Snug the screws to hold the mounting bracket firmly in place (don’t overtighten).
4. Align the thin client spine (from the back panel end) with the mounting bracket rails;
slide the thin client into the bracket until it snaps twice into place.
5. Optional – Attach the power adapter holder to the wall bracket using the two (2) M3x8
mm screws provided and slide or rotate the thin client’s power adapter into the power
adapter holder.
Note
For power source convenience, you can attach the power adapter holder to
either end of the mounting bracket.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wyse - Dell CX0LE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wyse - Dell CX0LE in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info