584849
3
Zoom out
Zoom in
Previous page
1/19
Next page
P.3
BATTERY REQUIREMENTS:
Your robot is powered by 4 x "D" size Alkaline batteries (2 batteries in each foot ).
Your remote controller is powered by 3 x "AAA" batteries.
BATTERY INSTALLATION:
• Be sure the robot power button is in the OFF position (OUT) before installing or changing batteries.
• Remove the battery covers with a Phillips/crosshead screwdriver as shown.
• Install recommended batteries as shown, making sure battery polarity is correct.
• Replace battery doors and carefully tighten all screws.
1.5V "AAA"
LR03 UM4
1.5V "AAA"
LR03 UM4
1.5V "AAA"
LR03 UM4
Remote
Control
Bottom View
Low Battery Indicators:
When Robosapien’s batteries grow weak, your Robosapien will move and walk very slowly.
- When this occurs, power robot OFF and replace all batteries.
When the remote controller's batteries grow weak, the indicator light will shine very dimly.
- When this occurs, replace all the batteries in the remote controller.
NOTE:
• Robot will just stop when battery power gets VERY low. Power off and replace all batteries.
• Some lighting or sunlight can interfere with Infra-Red signals Move the robot into shadow.
Battery Details
Base of Feet
Robosapien
IMPORTANT BATTERY INFORMATION
• Do not dispose of batteries in fire. Batteries may explode or leak.
• Do not mix used and new batteries. Replace all batteries at the same
time.
• Do not mix alkaline, standard (Carbon Zinc) or rechargeable (Nickel-
Cadmium) batteries. Only use new batteries of the same type.
• Due to small parts, it is recommended that batteries be installed or
replaced only by adults.
• Batteries must be inserted with the correct polarity or the robot will not
work.
• Dead batteries should be removed so they don't leak and damage the
battery contacts.
• Do not short circuit battery terminals or battery contacts.
• Do not try to recharge non-rechargeable batteries.
• Rechargeable batteries are not recommended for use in this robot.
1.5V
"D"
LR20
UM1
1.5V
"D"
LR20
UM1
1.5V
"D"
LR20
UM1
1.5V
"D"
LR20
UM1
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for WowWee WS8081 Robotics Robosapien at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of WowWee WS8081 Robotics Robosapien in the language / languages: English as an attachment in your email.

The manual is 2,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of WowWee WS8081 Robotics Robosapien

WowWee WS8081 Robotics Robosapien User Manual - German, French - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info