Manual Worx WX800 (page 10 of 100) (English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish)

673104

Zoom out

Zoom in

1/100

ENLithium-Ion cordless angle grinder

xINR18/65-y: Cylindrical lithium

Ion battery cells with max diameter

of 18mm and max height of 65mm;

“x” represents a number cells serial

connected, blank if 1; “-y” represents a

number of cells paralleled connected,

blank if 1.

OPERATING INSTRUCTIONS

NOTE: Before using the tool, read the

instruction book carefully.

INTENDED USE:

The machine is intended for cutting, roughing and

brushing metal and stone materials without using

water. For cutting metal, a special protection guard

for cutting (accessory) must be used.

ASSEMBLY AND OPERATION

Action Figure

BEFORE OPERATION

Removing the battery pack See Fig. A1

Charging the battery pack See Fig. A2

Installing the battery pack

WARNING: When

replacing the battery

pack, do not insert the

battery until the Grinding/

Cutting Disc comes to a

complete stop!

See Fig. A3

ASSEMBLY

Assembling Auxiliary Handle See Fig. B

Assembling Grinding/Cutting

Disc

See Fig. C1,

C2, C3

Adjusting Wheel Guard

NOTE: Before any work on

the machine itself, remove

the battery pack. For work

with grinding or cutting

discs, the protection guard

must be mounted. Use the

correct type of disc for your

application. If the power

tool is intended to perform

cutting off operations,

a guard speciﬁc for this

operation must be ﬁtted.

The coded projection on the

wheel guard ensures that only a

guard that ﬁts the machine type

can be mounted.

Open the clamping lever (13).

Place the wheel guard with

coded projection into the coded

groove on the spindle of the

machine head and rotate to

the required position (working

position).

To fasten the wheel guard, close

the clamping lever (13).

The closed side of the

wheel guard must always

point to the operator.

See Fig. D

OPERATION

Using On/Off Switch See Fig. E

Hand Grip Areas See Fig. F

Rough Grinding

WARNING! Never use a

cutting disc for

roughing.

Cutting See Fig. G

WORKING HINTS FOR YOUR

ANGLE GRINDER

1. Always start at no load to achieve maximum

speed then start working.

2. Do not force the disc to work faster, reducing the

Disc’s moving speed means longer working time.

3. Always work with a 15-30 angle between disc and

workpiece. Larger angles will cut ridges into the

workpiece and affect the surface ﬁnish. Move the

angle grinder across and back and forth over the

workpiece.

4. When using a cutting disc never change the

cutting angle otherwise you will stall the disc

and angle grinder motor or break the disc. When

cutting, only cut in the opposite direction to the

disc rotation. If you cut in the same direction as

the disc rotation the disc may push itself out of

the cut slot.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Worx WX800 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 5,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Worx WX800

Worx WX800 User Manual - English - 12 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Worx WX800 Manual

Product: