Manual Worx WX678.9 (page 8 of 92) (English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish)

673161

Zoom out

Zoom in

1/92

Oscillating Tool EN

Avoid danger of injury from the

sharp edges of the accessories.

Accessories can become very hot

while working, presenting danger

of burns!

Make sure the battery is

removed prior to changing

accessories.

Wear protective gloves

High oscillation frequency.

Low oscillation frequency.

- - -

LED light is a battery capacity

indicator and will ﬂash when power

gets low .

Waste electrical products should

not be disposed of with household

waste. Please recycle where fa-

cilities exist. Check with your Local

Authority or retailer for recycling

advice.

OPERATING INSTRUCTIONS

NOTE: Before using the tool, read the

instruction book carefully.

INTENDED USE:

The power tool is intended for sawing and

remodelling wooden materials, plastic, plaster,

non-ferrous metals and fasteners (e.g. nails and

clamps) as well as for working on soft wall tiles and

for dry grinding of small surfaces. It is especially

suitable for working close to edges and for ﬂush

cutting.

ASSEMBLY AND OPERATION

Action Figure

Mounting accessories See Fig. A-C

Mounting the sanding sheet See Fig. D

Mounting the suction device

(not supplied)

See Fig. E1-E5

Operating the on/off switch See Fig. F

Using the variable speed dial See Fig. G

Remove or install battery pack See Fig. H

LED Light See Fig. I

The Variable Speed Dial can be used to set the

optimum oscillating frequency according to the

accessories used and the respective application.

Oscillation

frequency

Application

High oscillation

frequency:

Sanding, Sawing, Rasping

and Polishing Stone and

Metal.

Low oscillation

frequency:

Scraping, Polishing

Varnishes.

DISPOSAL OF AN

EXHAUSTED BATTERY PACK

To preserve natural resources, please recycle

or dispose of the battery pack properly. This

battery pack contains Lithium batteries. Consult

your local waste authority for information regarding

available recycling and/or disposal options. Discharge

your battery pack by operating your drill, then remove

the battery pack from the drill housing and cover the

battery pack connections with heavy-duty adhesive

tape to prevent short circuit and energy discharge.

Do not attempt to open or remove any of the

components.

WORKING HINTS FOR YOUR

TOOL

If your power tool becomes too hot, especially when

used at low speed, set the speed to maximum and run

it with no load for 2-3 minutes to cool the motor. Avoid

prolonged usage at very low speeds. Always keep the

blade sharp.

Always ensure the workpiece is ﬁrmly held or clamped

to prevent movement.

Any movement of the material may affect the quality

of the cutting or sanding ﬁnish.

Start your tool before working and turn it off only after

you stop working.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Worx WX678.9 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 4,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Worx WX678.9 Manual

Product: