575125

Worx WX677.7 Manual

9
Zoom out
Zoom in
Previous page
1/128
Next page
9
High Frequency Multi-function Tool EN
OpERATION INSTRuCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
INTENDED USE
The power tool is intended for sawing and
separating wooden materials, plastic, plaster,
non-ferrous metals and fasteners (e.g.
nails and clamps) as well as for working on
soft wall tiles and for dry grinding of small
surfaces. It is especially suitable for working
close to edges and for flush cutting.
1. MOUNTING ACCESSORIES
CAUTION: For all work or when
changing accessories, always wear
protective gloves and make sure battery is
removed. Avoid danger of injury from the
sharp edges of the accessories. Accessories
can become very hot while working,
presenting danger of burns!
WARNING: To reduce the risk of
injury, do not let the sharp side of
the accessory face back toward the
user’s hand.
-Loosen the Flange
Use the Allen Key to rotate the Flange
clockwise (See Fig. A).
- Insert Accessories
Insert the Accessory onto the Universal Fit
TM
Accessory Interface (See Fig. B).
-Tighten the Flange
- Use the Allen Key to rotate the Flange
counterclockwise until accessory is tightened
securely (See Fig. C).
NOTE: For prior model WORX Sonicrafter
hex-interface
accessories and most other non-WORX
branded accessories, the Flange must be
completely removed to install accessory
(See Fig. D).
2. MOUNTING / CHANGING THE
SANDING SHEET (See Fig. E)
Align the sanding sheet and press it onto the
sanding pad by hand.
Firmly press the power tool with the sanding
sheet against a flat surface and briefly switch
the power tool on. This provides for good
To reduce the risk of injury, user
must read instruction manual
Warning
Wear eye protection
Wear ear protection
Wear dust mask
Do not burn
Do not expose to rain or water
Do not dispose of batteries, Return
exhausted batteries to your local
collection or recycling point.
SyMBOLS
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worx WX677.7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worx WX677.7 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info