673286

Worx WX647 Manual

12
Zoom out
Zoom in
Previous page
1/108
Next page
12
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the instruction
book carefully.
INTENDED USE
The machine is intended for dry sanding of wood,
plastic, filler and coated surfaces.
ASSEMBLY AND OPERATION
ACTION FIGURE
ASSEMBLY
* Fitting the Sanding Paper
See Fig. A
Using The Dust Adapter
See Fig. B1, B2
Attaching the Dust Box
CAUTION: To prevent the
possibility of sanding dust or
foreign body being thrown into your
face or eyes, never attempt to use
your sander without the dust box
properly installed.
See Fig. C
Emptying the Dust Box
-For more efficient operation, empty
dusts box every 5-10mins.
See Fig. D1,
D2, D3
OPERATION
On/Off Switch
See Fig. E
Flush Sanding Facility
See Fig. F
* Installing The Finger Pad
See Fig. G1, G2
* Removing The Finger Pad
See Fig. H1, H2
* Attach Sanding Sheets And
Pads
See Fig. I
Sanding With Finger Pad
See Fig. J
*
WARNING: Failure to unplug the sander could
result in accidental starting causing possible
serious personal injury.
WORK HINTS FOR YOUR PALM SANDER
If your power tool becomes too hot, run no load for 2-3
minutes to cool the motor.
Always ensure the work-piece is firmly held or clamped to
prevent movement.
Any movement of the material may affect the quality of
the sanding finish.
Start your sander before sanding and turn off only after
stopping sanding. For best results sand wood in the
direction of the grit.
Do not start sanding without sandpaper fitted.
Do not allow the sandpaper to wear away, it will damage
the base-plate. The guarantee does not cover base-plate
wear and tear.
Use coarse grit paper to sand rough surfaces, medium grit
for smooth surfaces and fine grit for the final surfaces. If
necessary, first make a test on scrap material.
Use only good quality sandpaper.
The sanding efficiency is controlled by the sandpaper not
the amount of force you apply to the tool. Excessiveforce
will reduce the sanding efficiency and cause motor
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worx WX647 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worx WX647 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 8,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info