Manual Worx WX550 (page 10 of 80) (English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish)

673194

Zoom out

Zoom in

1/80

20V Li-Ion multi-purpose saw EN

OPERATING INSTRUCTIONS

NOTE: Before using the tool, read the

instruction book carefully.

INTENDED USE

The machine is 2 saws in 1 tool with rep saw and

jig saw function, intended for sawing wood, plastic,

metal and building materials while resting ﬁrmly on

the workpiece. It is suitable for straight and curved

cuts.

ASSEMBLY AND OPERATION

ACTION FIGURE

BEFORE OPERATION

Removing the battery pack See Fig. A1

Charging the battery pack See Fig. A2

Installing the battery pack See Fig. A3

Working mode adjustment

Position I worked as a jigsaw.

Position II worked as a

reciprocating saw.

NOTE: Select the blade best

suitable for the working mode

for better cutting performance

(special reciprocating saw blade

not included).

WARNING!

• To avoid being pinched,

keep hands away from the

hinge when changing positions.

• To avoid tool being turned on

accidentally, make sure keep

your hands away from the lock-

off button.

• Before operation, make sure

the pivot release button is

locked into position.

See Fig. B1-C4

ASSEMBLY

Replacing the saw blade

When using jig saw mode,

the blade teeth face outward

as shown in Fig. D1; while in

rep saw mode, the blade teeth

should face as shown in Fig. D3.

CAUTION: Keep your

hands away from the

lock-off button to prevent

switch actuation before making

any adjustments or removing

or installing attachments or

accessories.

See Fig. D1-D3

OPERATION

WARNING! Burn hazard. Do not touch the

blade immediately after use. Contact with the

blade may result in personal injury.

Switching On and Off

NOTE: For safety reasons the

On/Off switch of the machine

cannot be locked; it must

remain pressed during the

entire operation.

See Fig. E

Pendulum Function See Fig. F1, F2

Cutting

WARNING!

• Never hold the pivot

head when operating the tool.

• Never hold the motor cover

when operating the tool.

Always use a blade suited to the

material and material thickness

to be cut. Before cutting any

type of material, be sure it is

ﬁrmly anchored or clamped to

prevent slipping. Holding the

work by hand or against your

body leaves it unstable and may

lead to loss of control.

• Whenever possible, the saw

foot plate must be held ﬁrmly

against the material being

cut. This will prevent the saw

from jumping or vibrating and

minimize blade breakage.

See Fig. G1 – G3

LED Work Light See Fig. H

WORKING HINTS FOR YOUR

MULTI-PURPOSED SAW

If your power tool becomes too hot, run no-load

for 2-3 minutes to cool the motor. Avoid prolonged

usage at very low speeds.

Any movement of the material may affect the quality

of the cut. The blade cuts on the upward stroke and

may chip the uppermost surface.

Ensure your uppermost surface is a non-visible

surface when your work is ﬁnished.

MAINTENANCE

Your power tool requires no additional

lubrication or maintenance.

There are no user serviceable parts in your power

tool. Never use water or chemical cleaners to clean

your power tool. Wipe clean with a dry cloth. Always

store your power tool in a dry place. Keep the motor

ventilation slots clean. Keep all working controls free

of dust. Occasionally you may see sparks through

the ventilation slots. This is normal and will not

damage your power tool.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Worx WX550 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 9,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Worx WX550 Manual

Product: