673194
7
Zoom out
Zoom in
Previous page
1/80
Next page
20V Li-Ion multi-purpose saw EN
7
*Not all the accessories illustrated or
described are included in standard delivery.
TECHNICAL DATA
Type WX550 WX550.1 WX550.9 (5-designation
of machinery, representative of Saw)
WX550
WX550.1
WX550.9
Rated voltage 20V
Max**
Charger voltage
100-240V~50/60Hz
/
No load speed 0-3000/min
Stroke length 20mm
Cutting capacity
Jigsaw
mode
Wood 50mm
PVC pipe 50mm
Steel plate 4mm
Rep saw
mode
Wood 100mm
PVC pipe 127mm
Steel
pipe
76mm
Machine weight 1.9kg 1.5kg
**Voltage measured without workload. Initial
battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.
NOISE INFORMATION
A weighted sound pressure L
pA
= 79,7dB(A)
A weighted sound power L
wA
= 90,7dB(A)
K
pA
&K
wA
3dB(A)
Wear ear protection
VIBRATION INFORMATION
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Cutting sheet
metal
Vibration emission value
a
h,M
= 4,805m/s
2
Uncertainty K = 1,5m/
Cutting boards
Vibration emission value
a
h,B
= 5,495m/s
2
Uncertainty K = 1.5m/s
²
Cutting wooden
beams
Vibration emission value
a
h,WB
= 5,535m/s
2
Uncertainty K = 1.5m/s²
The declared vibration total value may be used for
comparing one tool with another, and may also be
used in a preliminary assessment of exposure.
WARNING: The vibration emission value
during actual use of the power tool can differ
from the declared value depending on the ways in
which the tool is used dependant on the following
examples and other variations on how the tool is
used:
How the tool is used and the materials being cut.
The tool being in good condition and well
maintained.
The use of the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any
anti vibration accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately
managed.
WARNING: To be accurate, an estimation
of exposure level in the actual conditions
of use should also take account of all parts of the
operating cycle such as the times when the tool
is switched off and when it is running idle but not
actually doing the job. This may significantly reduce
the exposure level over the total working period.
1. ON/OFF SWITCH
2. LOCK-OFF BUTTON
3. HAND GRIP AREAS
4. PIVOT RELEASE BUTTON
5. MOTOR COVER
6. PENDULUM FUNCTION CONTROL
7. PROTECTION FINGER
8. LED WORK LIGHT (SEE FIG. H)
9. BLADE HOLDER
10. FOOT PLATE
11. BOTTOM PLATE
12. BASE PLATE
13. BATTERY PACK *
14. BATTERY PACK RELEASE BUTTON*
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worx WX550 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worx WX550 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 9,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info