575036
47
Zoom out
Zoom in
Previous page
1/136
Next page
Atornilladora taladradora con batería de iones de litio
ES
47
INSTRUCCIONES DE
FUNCIONAMIENTO
NOTA: Antes de usar la herramienta
lea el manual de instrucciones
detenidamente.
UTILIZACIÓN REGLAMENTARIA
La herramienta eléctrica ha sido diseñado
para apretar y aflojar tornillos, así como para
taladrar madera, metal,y plástico.
ANTES DE ENCENDER EL DISPOSITIVO
A) CARGAR LA BATERÍA
El cargador suministrado es adecuado para
cargar la batería de iones de litio instalada
en la máquina. No utilice otro cargador de
baterías.
La batería de iones de litio se encuentra
protegida contra descarga profunda. Si la
batería se vacía, la máquina se apaga por
medio de un circuito preventivo: El soporte
de la herramienta dejará de rotar.
En un entorno cálido o después de un uso
intenso, la batería podría estar demasiado
caliente para volver a ser cargada. Deje que
la batería se enfríe antes de volver a cargarla.
Si carga la batería por primera vez y
después de un periodo de almacenamiento
prolongado, después de varios ciclos de
carga y descarga, la batería volverá a aceptar
el 100% de su capacidad.
B) EXTRAER O INSTALAR EL PACK DE
BATERÍA (Vease La. A)
Presione el cierre de la batería y extraiga
la batería del taladro. Después de volver a
cargarla, instale la batería en el puerto de
batería del taladro. Sólo necesitará presionar
ligeramente para fijarla.
INSTRUCCIONES DE FUNCIONAMIENTO
1. INTERRUPTOR (Vease La. B)
Presiónelo para accionar su taladro y
suéltelo para detenerlo. El interruptor de
encendido/apagado posee un dispositivo
de frenado que detiene el mandril en forma
inmediata cuando Ud. suelta rápidamente el
interruptor.
También es un conmutador de velocidad
variable que ofrece mayor velocidad y
torsión al aumentar la presión del gatillo. La
velocidad se controla a través de la presión
del gatillo.
¡ADVERTENCIA: No utilice la
herramienta a velocidad baja por
períodos largos, ya que se produci
un exceso de calor en el interior de la
misma.
2. SISTEMA DE CIERRE DEL
INTERRUPTOR
El gatillo del interruptor se puede trabar en
la posición de apagado (OFF). Esto ayuda a
reducir la posibilidad de arranque accidental
cuando la herramienta no está en uso. Para
bloquear el gatillo del interruptor, coloque el
selector de dirección de rotación en posición
central.
3. DIRECCIÓN DE ROTACIÓN
(Vease La. C1,C2)
Para taladrar y atornillar, utilice la posición
” (mueva la palanca hacia la izquierda.
Utilice sólo el movimiento inverso marcado
con “ ” (palanca a la derecha) para
extraer tornillos o liberar una broca atascada.
¡ADVERTENCIA: ¡Nunca cambie
la dirección de rotación cuando el
mandril está girando; espere hasta que
se haya detenido!
4. TREN DE ENGRANAJES DE DOS
VELOCIDADES (Vease La. D)
El taladro posee un tren de engranajes de
dos velocidades diseñado para perforar o
atornillar a velocidades bajas (1) o altas (2).
La selección de velocidades bajas (1) o altas
(2) se realiza por medio de un interruptor
deslizante situado en la parte superior
del taladro. Cuando el taladro se emplea
a velocidad baja (1) esta disminuirá y la
herramienta tendrá mayor potencia y par.
Cuando el taladro se emplea a velocidad alta
(2) esta se incrementará y la herramienta
tendrá menor potencia y par.
Marcha I
Baja velocidad: para atornillar o trabajar con
grandes diámetros de perforación.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worx WX160.3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worx WX160.3 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info