575007
46
Zoom out
Zoom in
Previous page
1/128
Next page
46
Atornilladora taladradora con
batería de iones de litio
ES
INSTRUCCIONES DE
FUNCIONAMIENTO
NOTA: Antes de usar la herramienta lea
el manual de instrucciones
detenidamente.
USO INDICADO
La herramienta eléctrica ha sido diseñado
para ajustar y aflojar tornillos, y para taladrar
madera, metal plástico.
ANTES DE ENCENDER EL DISPOSITIVO
A) CARGAR LA BATERÍA
El cargador suministrado es adecuado para
cargar la batería de iones de litio instalada
en la máquina. No utilice otro cargador de
baterías.
La batería de iones de litio se encuentra
protegida contra descarga profunda. Si la
batería se vacía, la máquina se apaga por
medio de un circuito preventivo: El soporte de
la herramienta dejará de rotar.
En un entorno cálido o después de un uso
intenso, la batería podría estar demasiado
caliente para volver a ser cargada. Deje que la
batería se enfríe antes de volver a cargarla.
Si carga la batería por primera vez y
después de un periodo de almacenamiento
prolongado, después de varios ciclos de carga
y descarga, la batería volverá a aceptar el
100% de su capacidad.
B) PARA EXTRAER LA BATERÍA (Véase
La. A1)
Primero presione firmemente el Botón de
Expulsión de la Batería (6) y extraiga la batería
del taladro.
C) PARA INSTALAR LA BATERÍA (Véase
La. A2)
Introduzca la Batería totalmente cargada en
la herramienta empujándola suficientemente
hasta escuchar el clic de acoplamiento.
INSTRUCCIONES DE
FUNCIONAMIENTO
1. INTERRUPTOR (Véase La. B)
Presiónelo para accionar su taladro y suéltelo
para detenerlo. El interruptor de encendido/
apagado posee un dispositivo de frenado que
detiene el mandril en forma inmediata cuando
Ud. suelta rápidamente el interruptor.
También es un conmutador de velocidad
variable que ofrece mayor velocidad y torsión
al aumentar la presión del gatillo. La velocidad
se controla a través de la presión del gatillo.
¡ADVERTENCIA: No utilice la
herramienta a velocidad baja por
períodos largos, ya que se producirá un
exceso de calor en el interior de la
misma.
2. SISTEMA DE CIERRE DEL
INTERRUPTOR
El gatillo del interruptor se puede trabar en
la posición de apagado (OFF). Esto ayuda a
reducir la posibilidad de arranque accidental
cuando la herramienta no está en uso. Para
bloquear el gatillo del interruptor, coloque el
selector de dirección de rotación en posición
central.
3. DIRECCIÓN DE ROTACIÓN
(Véase La. C1, C2)
Para taladrar y atornillar, utilice la posición
“ (mueva la palanca hacia la izquierda.
Utilice sólo el movimiento inverso marcado
con “ “ (palanca a la derecha) para extraer
tornillos o liberar una broca atascada.
¡ADVERTENCIA: ¡Nunca cambie la
dirección de rotación cuando el
mandril está girando; espere hasta que
se haya detenido!
4. TREN DE ENGRANAJES DE DOS
VELOCIDADES (Véase La. D)
El taladro posee un tren de engranajes de
dos velocidades diseñado para perforar o
atornillar a velocidades bajas (1) o altas (2).
La selección de velocidades bajas (1) o altas
(2) se realiza por medio de un interruptor
deslizante situado en la parte superior
del taladro. Cuando el taladro se emplea
a velocidad baja (1) esta disminuirá y la
herramienta tendrá mayor potencia y par.
Cuando el taladro se emplea a velocidad alta
(2) esta se incrementará y la herramienta
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worx WX156.2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worx WX156.2 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info