575007
37
Zoom out
Zoom in
Previous page
1/128
Next page
37
Trapano/avvitatore con
btteria agli ioni di litio
I
ISTRUZIONI DI
FUNZIONAMENTO
NOTA: Leggere scrupolosamente il
manuale delle istruzioni prima di usare
l’attrezzo.
USO CONFORME ALLE NORME
La macchina è idonea per avvitare e svitare
viti ed anche per forare nel legname, nel
metallo, nelle materie plastiche.
PRIMA DELLA MESSA IN FUNZIONE
A) CARICARE LA BATTERIA
Il caricatore fornito in dotazione è adatto
alla batteria agli ioni di Litio installata sulla
macchina. Non usare altri tipi di caricatore.
La batteria agli ioni di Litio è protetta per
impedire che si scarichi completamente.
Quando la batteria è scarica, la macchina si
spegne automaticamente grazie d un circuito
di protezione: il mandrino non ruota più.
In ambienti caldi, dopo usi prolungati, il
pacco batteria può diventare troppo caldo
per consentire il caricamento. Consentire alla
batteria di raffreddarsi prima di ricaricarla.
La prima volta che si carica la batteria,
oppure dopo un immagazzinamento
prolungato, dopo vari cicli di caricamento e
scaricamento, la batteria si caricherà al 100%.
B) RIMOZIONE DEL PACCO BATTERIA
(Vedi A1)
Premere dapprima il tasto di rilascio del
pacco batteria (6) e poi far scorrere il pacco
batteria per rimuoverlo dall’apparecchio.
C) INSTALLAZIONE DEL PACCO
BATTERIA (Vedi A2)
Dopo la ricarica far scorre le batteria
attraverso la porta della batteria del trapano.
Sarà sufficiente una leggera pressione.
ISTRUZIONI DI
FUNZIONAMENTO
1. INTERRUTTORE ACCENSIONE/
SPEGNIMENTO (Vedi B)
Premere il tasto per azionare il trapano e
rilasciarlo per arrestarlo. Il tasto on/off è
dotato di una funzione freno che arresta
immediatamente il mandrino se si rilascia
velocemente il tasto. Questa funzionen
risulta molto utile nel caso di avvitamento/
sviamento.
È anche un interruttore di velocità
variabile che fornisce maggiore velocità
e torsione come si aumenta la pressione
dell’interruttore. La velocità è controllata
dalla quantità di pressione dell’interruttore.
ATTENZIONE: Non usare per periodi
prolungarti a bassa velocità perché
internamente si crea un calore
eccessivo.
2. TASTO ON/OFF CON FUNZIONE
FRENO
Premere il tasto per azionare il trapano e
rilasciarlo per arrestarlo. Il tasto on/off è
dotato di una funzione freno che arresta
immediatamente il mandrino se si rilascia
velocemente il tasto. Questa funzionen
risulta molto utile nel caso di avvitamento/
sviamento.
3. INVERSIONE DELLA ROTAZIONE
(Vedi C1, C2)
Per trapanare ed avvitare usare la rotazione
avanti contrassegnata da ” (la leva è
spostata sulla sinistra). Usare la rotazione
inversa, contrassegnata da ” (la leva
è spostata sulla destra), solamente per
rimuovere le viti o le punte del trapano
bloccate.
ATTENZIONE: Non invertire mai la
direzione di rotazione mentre il
mandrino è in movimento. Attenderne
l’arresto!
4. CAMBIO A DUE VELOCITÁ (Vedi D)
Il trapano possiede un cambio a due velocità
per trapanare ed avvitare a basse velocità
LO (segno 1) o alte velocità HI (segno
2). Sopra il trapano è presente un tasto
mobile per la selezione di bassa LO o alta
HI velocità. In modalità bassa velocità (LO),
la velocità si riduce e conseguentemente
aumenta la coppia del trapano cioè la forza
di avvitamento. In modalità alta velocità (HI)
si ottiene un aumento della velocità ma una
riduzione della coppia del trapano, cioè della
forza di avvitamento.
Velocità I
Velocità bassa: per funzione avvitatore o per
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worx WX156.2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worx WX156.2 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info