575004
35
Zoom out
Zoom in
Previous page
1/96
Next page
35
Trapano/avvitatore con
btteria agli ioni di litio
I
ISTRUZIONI DI
FUNZIONAMENTO
NOTA: Leggere scrupolosamente il
manuale delle istruzioni prima di usare
l’attrezzo.
USO CONFORME ALLE NORME
La macchina è idonea per avvitare e svitare
viti ed anche per forare nel legname, nel
metallo, nelle materie plastiche.
MONTAGGIO E FUNZIONAMENTO
Azione Figura
PRIMA DEL FUNZIONAMENTO
Controllo dello stato di carica
della batteria
Vedere Fig.A1
Rimozione del pacco batteria Vedere Fig. A2
Caricamento della batteria Vedere Fig..A3
MONTAGGIO
REGOLAZIONE DEL MANDRINO
AVVERTENZA: Bloccare sempre
l’interruttore di azionamento e scollegare
l’utensile dalla sorgente di alimentazione
quando vengono sostituiti gli accessori.
Assicurarsi sempre che la punta sia ben fissata
prima di avviare l’utensile. Un mandrino
danneggiato o una puntata allentata possono
causare lesioni personali.
Rimozione delle punte Vedere Fig..B1
Inserimento delle punte Vedere Fig..B2
FUNZIONAMENTO
Controllo rotazione avanti/
indietro
ATTENZIONE: Non
invertire mai la
direzione di rotazione
mentre il mandrino è in
movimento. Attenderne
l’arresto!
Vedere Fig.
C1, C2, C3
CONTROLLO DELLE
MARCE A DUE VELOCITÀ
Vedere Fig.D
REGOLAZIONE DELLA
COPPIA E CONTROLLO DELLA
TRAPANATURA, AVVITATURA
O PERCUSSIONE
Vedere Fig..E
Funzionamento
dell’interruttore di
accensione/spegnimento
ATTENZIONE:
Non usare per
periodi prolungarti a
bassa velocità perché
internamente si crea un
calore eccessivo.
Vedere Fig.F
Indicatore spia LED
Prima del funzionamento, il LED si accende
quando si preme lievemente l’interruttore On/
Off e si spegne automaticamente 20 secondi
dopo aver rilasciato l’interruttore On/Off.
L’utensile e la batteria sono muniti di un
sistema di protezione. Quando la spia LED
lampeggia rapidamente per 3 secondi
e poi si spegne, il sistema interromperà
automaticamente l’alimentazione all’utensile
per estendere la durata della batteria.
L’utensile si arresta automaticamente durante
il funzionamento se l’utensile e/o la batteria si
trovano in una delle seguenti condizioni:
Sovraccarico: l’utensile viene fatto
funzionare in modo tale da generare una
corrente eccessivamente elevata. In tal
caso, rilasciare l’interruttore di attivazione
sull’utensile e interrompere l’applicazione che
ha causato il sovraccarico dell’utensile. Quindi
tirare nuovamente l’interruttore di attivazione
per riavviarlo.
Surriscaldamento: Nella condizione di
cui sopra, se l’utensile non viene avviato,
l’utensile e la batteria sono sovraccarichi. In
tal caso, lasciare che l’utensile e la batteria
si raffreddino prima di tirare nuovamente
l’interruttore di attivazione.
Bassa tensione della batteria: la capacità
rimanente della batteria è troppo bassa e
l’utensile non può funzionare. In tal caso,
rimuovere e ricaricare la batteria.
ATTENZIONE: Per accendere la
luce, premere l’interruttore On/Off e
assicurarsi il comando di rotazione avanti/
indietro sia a destra/sinistra.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worx WX152.4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worx WX152.4 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 4,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info