536207
9
Zoom out
Zoom in
Previous page
1/12
Next page
9
chosen position, ensuring that the button springs back out to lock the
selector when the chosen position is reached. (See B)
AUXILIARY HANDLE
Slide the handle onto the drill and rotate to the desired working
position. To clamp the auxiliary handle rotates the handgrip clockwise.
To loosen the auxiliary handle rotate the hand grip anti-clockwise.
Always use the auxiliary handle (See C).
DEPTH GAUGE
Fit the drill bit or driver bit into the chuck. Loosen the depth gauge by
rotating the handle grip anti-clockwise. Slide the depth gauge until the
distance between the depth gauge end and the drill/driver bit end is
equal to the depth of hole/screw you wish to make. Then clamp the
depth gauge by rotating the handle clockwise.
INSERTING TOOLS
KEYLESS CHUCK (WU303.1 WU303L)
Grip rear collar of keyless chuck and rotate front collar until chuck is
open sufficient for tool to be inserted. Insert the tool into the chuck.
Grip rear collar and manually rotate front collar until tight. The locking
mechanism is automatically released when the front collar is rotate in
the opposite direction in order to remove the tool. (See D.1)
KEY CHUCK (WU303)
Insert tool and tighten equally in all 3 bores with chuck key. (See D.2)
SPEED CHANGE KNOB
Choose position 1 for high torque/low speed range for large diameter
drill bits and screw driving. Choose position 2 for low torque/ High-
speed range for small diameter drill bits. If the gears do not engage
easily then rotate the chuck by hand to align the gears. Never change
the gears when the tool is rotating, wait until it has stopped.
6
7
8
9
1
2
A B
C D.1
D.2
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worx WU303 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worx WU303 in the language / languages: English as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info