723945
31
Zoom out
Zoom in
Previous page
1/38
Next page
Quick reference EN
31
ERROR MESSAGES
Sometimes things can go wrong. Fortunately Landroid is smart enough to tell you if it is enountering an issue, so you can fix it. If in doubt,
please visit our website where you will find useful videos and further support.
MESSAGE CAUSE ACTION
Outside working area! Press START to
reset.
Landroid cannot find the boundary wire
signal.
1. If Landroid is actually outside of its
working area: turn power off, take
Landroid inside the working area, turn
the power on and press start.
2. If Landroid is inside its working area
check if the LED on the charging base is
solid green. If red, check if the boundary
wire is properly connected to the
charging base and that the base is
connected to a suitable power supply.
If they are properly connected, the
boundary wire terminals are clamped
incorrectly and must be reversed.
WRONG PIN! Please retry. PIN code is wrong. Input the correct PIN or re-set your PIN.
Blade motor fault! Press START to reset. Blade disc is blocked by an object, e.g.
a branch.
Turn power off.
Turn Landroid upside down and check
if there’s anything preventing the blade
disc from rotating and remove any
obstruction.
Turn Landroid upright.
Turn power on. Press start.
Blade is over-loaded by thick dense
grass.
Turn power off.
Take Landroid to an area with short
grass or adjust the cutting height to a
higher setting.
Turn power on. Press start.
Wheels motor fault! Press START to
reset.
Wheel motor is blocked in some way. Turn power off and take Landroid to an
area free from obstacles.
Turn power on. Press start.
If the error message is still displayed,
turn power off. Turn Landroid
upside-down and check if there’s
anything preventing the wheels from
rotating.
Remove any obstruction, turn Landroid
upright, turn power on.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worx WR153E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worx WR153E in the language / languages: English as an attachment in your email.

The manual is 5,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Worx WR153E

Worx WR153E User Manual - Dutch - 38 pages

Worx WR153E User Manual - French - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info