723936
13
Zoom out
Zoom in
Previous page
1/38
Next page
Getting started EN
13
NOW ROLL YOUR SLEEVES UP. WHEN IT’S DONE IT’S DONE!
Now that you have planned the installation in every detail, you are ready to take action. Before starting, you may want to use your old
mower for the last time to clean up your lawn and make the installation easier.
Fix the charging station in the selected location
Secure the base to the ground by means of the supplied screws, using the supplied Allen key (fig.1)
If you position the base on hard surface, fix it with plug and screw fixings (not supplied)
Connect one end of the boundary wire to the charging station
Strip the end of the wire with a pair of scissors (fig. 2)
Open the plastic door and insert the stripped end into the red left clamp (fig. 3)
Pass the wire through the guide of the base, as shown in fig. 3
1
OUT
3
2
Lay the boundary wire around your lawn
Use the supplied gauge to set the distance wire to edge
If there is a step at the edge of your lawn, keep the wire at 26cm from it (fig. 4)
If there is no step, keep the wire at 10cm from the edge (fig. 5)
26cm
26 cm
10 cm
10,2 inch.
4 cm
4
10cm
26 cm
10 cm
10,2 inch.
4 cm
5
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worx WR142E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worx WR142E in the language / languages: English as an attachment in your email.

The manual is 9,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Worx WR142E

Worx WR142E User Manual - Dutch - 38 pages

Worx WR142E User Manual - French - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info