723926
32
Zoom out
Zoom in
Previous page
1/36
Next page
Quick reference EN
32
TROUBLE SHOOTING
If your Landroid does not work correctly, follow the trouble shooting guide below. If the fault persists, contact Customer Service.
SYMPTOM CAUSE SOLUTION
The LED light on the charging base
does not turn on.
There is no power. Check the charging base is connected
properly to the charger and the charger
is connected to a suitable power supply.
Red light on the charging base. The boundary wire isn’t connected. Check that the boundary wire has been
connected correctly to the charging
base. Check there are no breaks in
the boundary wire.
Landroid turns on, but the blade disc
does not spin.
Landroid is searching for the charging
base.
This is normal: when Landroid needs to
recharge, the blade disc does not rotate
while it is searching for the charging
base automatically.
Landroid vibrates. The blade disc is unbalanced.
Blades may be damaged.
Check the blades and replace them if
damaged.
Remove debris and foreign objects from
the blades and blade disc.
Grass is being cut unevenly. Landroid does not work enough hours
per day to cut the grass.
Try adding more hours to the mowing
schedule.
Mowing area is too big for the size of
Landroid you have.
Try decreasing the size of the mowing
area.
The blades are dull and not sharp. Change all the blades and screws in
order to balance the bade disc.
The cutting height is set too low for the
length of the grass.
Raise the cutting height and then
gradually lower.
Grass or another object has wrapped
around the blade disc.
Check the blade disc and remove any
grass or other objects that might
prevent it spinning.
There is a build-up of grass in the blade
disc or motor frame box.
Make sure the blade disc rotates easily.
If need be, you may take off the blade
disc and then remove the debris.
Your Landroid is inside its working area
and the boundary wire is connected, but
‘– E1 –’ is displayed.
The boundary wire ends are clamped
incorrectly.
Reverse the boundary wire ends and
reconnect to the charging station.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worx WR130E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worx WR130E in the language / languages: English as an attachment in your email.

The manual is 9,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Worx WR130E

Worx WR130E User Manual - Dutch - 36 pages

Worx WR130E User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info