723922
15
Zoom out
Zoom in
Previous page
1/19
Next page
15
EN
Completing the setup of the boundary wire
After outlining your garden with the boundary wire, you are now
ready to complete the boundary wire setting.
Repeat Step 1.2 to lead the boundary wire to the charging base.
Cut the wire to a length that’s appropriate to reach the wire
terminal on the charging base. Strip the plastic from the end of
the boundary wire.
NOTE: If you need to extend the boundary wire, please refer
to “Joining the Boundary Wire” in Owners Manual for
instructions.
Connect the wire to the OUT-wire terminal (Red), and replace the
terminal cover.
NOTE: The boundary wire must not be crossed when
connecting to the charging base. The right-hand wire end must
be connected to the IN-wire terminal on the charging base and
the left-hand wire end to the OUT-wire terminal.
NOTE: The extended boundary wire should not exceed 250m or
it may cause signal problem. Make sure the wire is straight and
tight.
2.8
90
o
IN WIREOUT WIRE
OUT
(Red)
IN
(Black)
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worx WR106 SI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worx WR106 SI in the language / languages: English as an attachment in your email.

The manual is 15,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Worx WR106 SI

Worx WR106 SI User Manual - English - 20 pages

Worx WR106 SI Installation Guide - Dutch - 19 pages

Worx WR106 SI User Manual - Dutch - 21 pages

Worx WR106 SI Installation Guide - French - 19 pages

Worx WR106 SI User Manual - French - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info