Manual Worx WR102 SI (page 9 of 20) (English)

723918

Zoom out

Zoom in

1/20

Owner’s Manual of Lawn Mowing Robot EN

5.2 How does my Landroid

know what to mow?

Your Landroid

is capable of doing things on its own. The Landroid

knows when it needs to go to its Charging Base (3) to

charge, can sense when it is raining, can stop itself if it senses a problem, and knows to stop, draw back, and turn around

when it bumps into something blocking its path. The Landroid

will also automatically stop its Blade Turning Disc (13) from

rotating if it is lifted off the ground to prevent an accident.

A. Finding the charging base

When your Landroid

needs to recharge, it will stop mowing and follow the Boundary Wire (17) in an anti-clockwise

direction back to its Charging Base. Landroid

is pre-programmed to mow the grass near the boundary wire once a week.

By default, Landroid

will mow near the boundary wire at a random time during the next week after it is powered on.

If you don’t want to enable boundary cut, deactivate it via your smartphone. (Please check Technical Data & Declaration of

Conformity for information specific to each model)

B. Rain sensors

The Landroid

is equipped with a Rain Sensor (7) which detects rain

and tells the Landroid

to stop mowing and follow the Boundary Wire

back to its Charging Base (See Fig. B).

Landroid

will resume mowing after passing the Delay Time, The

default Delay Time is 180mins. Delay Time setting can be changed via

Landroid

APP (for specific models only). Please check Technical Data

& Declaration of Conformity for information specific to each model.

When the rain sensors are wet, the Landroid

returns to its charging

base. The error indication light will flash blue four times per cycle.

When the rain sensors dry, Landroid

will begin the Delay Time

countdown or return to mowing (depending on the saved settings).

If you want to exit from the rain delay, dry the sensor area, and

perform a power cycle by operating the Main Switch. After the

power cycle has been performed you can see that the blue led is not

flashing and so you can operate again.

NOTE: If the delay time is set to 0, Landroid

will continue mowing.

C. Sensing the boundary wire

The Landroid

always obeys the border set by the Boundary Wire and uses sensors at its front to detect it. (See Fig. C).

D. Starting and stopping while mowing (See Fig. D, E1, E2)

If you would like Landroid

to stop mowing, simply press the STOP button (9) on top of the mower. To start mowing, turn

the main switch to “I” (on), wait until the battery indication light stays green. Press

, then press . ( If Landroid

has

low battery capacity, the battery indication light will stay red.)

If Landroid

senses something is wrong, the error indication light will indicate the fault message. For information on these messages,

refer to the Error Messages." Landroid

will turn off if it does not receive any input from the user within 20 min.

To resume:

• Turn the Main switch (8) to “O”(off)

• Correct the problem (refer to Error Messages)

• Turn the main switch (8) to “I”(on), Wait until the battery indication light stays green. (If Landroid

has low battery

capacity, the battery indication light will stay red.)

• Press

, then press

• Now the Landroid

will begin to mow!

Bonjoiur.
Nous avons une tondeuse worx 102 SI laquel n'a jamais donné total satisfaction mais...
Actuellemnt elle tond en marche Ar parfois va en Av, ne fais plus la pelouse de façon complete...
Un des noteur se bloque lorsque actionne celui-ci a la main. Que puis-je faire pour la rementre en ordre.
Submitted on 19-4-2022 at 07:17
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Worx WR102 SI in the language / languages: English as an attachment in your email.

The manual is 4,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Worx WR102 SI

Worx WR102 SI Installation Guide - English - 19 pages

Worx WR102 SI Installation Guide - Dutch - 19 pages

Worx WR102 SI User Manual - Dutch - 21 pages

Worx WR102 SI Installation Guide - French - 19 pages

Worx WR102 SI User Manual - French - 21 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Worx WR102 SI Manual

Product: