641673
16
Zoom out
Zoom in
Previous page
1/164
Next page
16
EN
Open the keypad window
by pressing the large red
button on the top of your
Landroid
®
L.
Press and hold down the
Power ON/OFF
key
until the Landroid
®
L turns on.
Input the default PIN 0000
Press the
key and close
the keypad window: your
Landroid
®
L will now find its
way to the charging base.
Watch the Landroid
®
L as it
returns to the charging base
and modify the positioning
of the boundary wire if
necessary. When the
Landroid
®
L successfully
returns to the charging base,
this means the installation has
been successfully completed!
Now your Landroid
®
L will start
to fully charge.
4.2
If your Landroid
®
L is
outside its territory, it
will not move and the
display will indicate
outside working area”
error. Just move it inside
its territory and repeat
step 4.2.
If your Landroid
®
L is
inside its territory but
the display says outside
working area” and the
LED is on, it means you
clamped the boundary
wire ends incorrectly.
Just reverse them.
Your Landroid
®
L should
always remain switched
on. If you ever need to
turn it off, then make sure
you place it within its
boundary area before you
switch it back on again.
Should your Landroid
®
L
stop operating
unexpectedly, just press
the STOP button, open
its keypad window, press
its ON/OFF key to ON,
correct the problems,
press
button, shut its
keypad window.
NOTE: Please refer to the Programming and Troubleshooting Guide for more information.
Warning
4. Turn on and test the installation
Place your Landroid
®
L inside the
working area, a few meters from
the back of the charging base.
4.1
This is the exciting part where you can turn your Landroid
®
L on for the first time.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worx WG798E.1 Landroid at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worx WG798E.1 Landroid in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 47,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Worx WG798E.1 Landroid

Worx WG798E.1 Landroid User Manual - English, German, Dutch, French, Italian, Polish, Spanish - 140 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info