641673

Worx WG798E.1 Landroid Manual

12
Zoom out
Zoom in
Previous page
1/140
Next page
Lawn Mowing Robot EN
12
6. Software update
Your Landroid
®
L software can be updated when new versions become available. The software version will be displayed in
the diagnosis page by pressing button 2 on homepage. The latest software can be downloaded from our website
www.worxlandroid.com. See the detailed guideline on download page.
The manual in box is based on the default software in the mass production .Some new features/functions in the new
version may not exist in the manual If you found some settings not in the manual, please visit www.worxlandroid.com to
download the latest manual.
7. Maintenance
Your Landroid
®
L needs to be checked from time to time. The Landroid
®
L works hard and after time needs a good cleaning as
well as to have its parts replaced, as they can become worn. In the following we want to let you know how to take care of your
Landroid
®
L.
7.1 Keep it Sharp
WARNING: Before cleaning, adjusting, or replacing
the Blades, turn your Landroid
®
L OFF and put on
protective gloves.
WARNING! When fitting new blades, make sure
you replace ALL the blades. Always use new
screws when fitting blades . This is important to ensure
blade retention. Failure to use new screws could cause
serious injury.
The Landroid
®
L does not cut grass like other mowers. Its Blades
(17) are razor sharp on all 4 edges and spin in both directions
for maximum cutting capacity (See Fig. J).Each blade of your
Landroid
®
L has 4 cutting edges. Depending on the frequency
the Landroid
®
L mows your lawn, the cutting blades will need
to be flipped/rotated periodically for a new cutting edge. If your
Landroid
®
L is programmed to mow the lawn every day then the cutting blades will need to be rotated monthly for the
best mowing results. Each cutting blade will last up to 4 months when it is programmed to mow every day. When the
cutting blades are dull and worn out, they should be replaced with the spare blades provided with your Landroid
®
L. Spare
blades are also available at your nearest WORX retailer.
A. Rotate and Flip the Blades
Your Landroid
®
L carries the Blades that are all screwed onto the Blade Disc (16). The Blades allow the Landroid
®
L to do its
job and need care and attention. Every once in awhile, you should simultaneously rotate and flip all blades for a perfect cut.
When rotating and flipping the Blades, make sure all the Blades are adjusted at the same time or else it could make the Blade
Disc off balance. If your Landroid
®
L mows on a normal schedule (daily) then the Blades should last one season if they are
rotated and flipped every month. Always check to see if the Blades are chipped or damaged and replace them if they are.
B. Replace the Blades (See Fig. K)
After some time, usually every season, your Landroid
®
L’s Blades will
need to be replaced. Your Landroid
®
L does not like mowing while
using Blades of different age and quality. So when replacing the
Blades, make sure to replace all of them at the same time. You can
replace them with one of the three spare Blade kits and extra Blade
screws supplied with your Landroid
®
L.
Before attempting to replace your Landroid
®
L’s Blades, turn the
power off and put on protective gloves. Then follow these steps:
1. Gently flip the Landroid
®
L over
2. Remove the battery cover and remove the battery.
3. Take the screws off the Blades with a screwdriver
4. Firmly screw on the new Blades
5. Refit the battery and battery cover.
IMPORTANT: After screwing the Blade to the Blade Disc,
make sure the Blade is able to spin freely.
43
1 2
J
K
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worx WG798E.1 Landroid at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worx WG798E.1 Landroid in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 25,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Worx WG798E.1 Landroid

Worx WG798E.1 Landroid Installation Guide - English, German, Dutch, French, Italian, Polish, Spanish - 164 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info