Manual Worx WG790E (page 11 of 144) (English, German, Danish, French, Italian, Polish, Portuguese, Spanish)

578150

Zoom out

Zoom in

1/144

Lawn Mowing Robot EN

4. Boundary Wire Basics

4.1 Pegging the Boundary Wire

Use the Boundary Wire Distance Gauge (24) to set the correct

distance from the border of your lawn (More than 35cm *).

* This is the recommended distance. Use the provided distance

gauge to ensure proper installation.

If your neighbor also uses a Landroid

M, then you must keep a

spacing of at least 2 metres between your Boundary Wire and your

neighbors.

Please be aware that your Landroid

M will not be able to receive a

signal from the Boundary Wire beyond the distance of 18m.

The boundary wire must outline the intended mowing area

exactly.

Your Landroid

M will become confused by extra bends or coils of Boundary Wire that are not part of its mowing

area ( See Fig. H). If there is excess Boundary Wire after the mowing area has been outlined, then cut it off and store

this additional wire in a separate location. However, it is important to leave the necessary length where it connects to the

Charging Base so it can be connected and still remain buried.

4.2 Burying the Boundary Wire

If you are planning to bury the Boundary Wire then it should be noted that when entering its Charging Base for the first time,

your Landroid

M may find problems with the way you have laid the wire. It is recommended to first peg down the Boundary

Wire to the lawn so it is easy to make adjustments if necessary. This will allow the Landroid

M to become adjusted to its new

environment and ensures it will successfully work with the charging base before the Boundary Wire is buried.

When you have completed installing the boundary wire, it is recommended that you ask Landroid

M to follow the boundary

wire by pressing the home button.

Whilst observing Landroid

M locating the charging station you can then make alterations to the boundary wire route to

ensure trouble free tracking of the boundary wire by Landroid

M when locating the charging station.

4.3 Joining the Boundary Wire

The Boundary Wire (21) can be extended simply by splicing the ends

and connecting it to the ends of another piece of wire. You can use

insulating tape to secure the joined part of the wire. (See Fig. I)

4.4 Turn on and test installation

If the charger base LED does not come on, then check the power

connections.

If the charger base LED is flashing green, check if the boundary wire

is connected correctly.

Red light on: charging.

Red light flashing: error message, refer to Trouble Shooting and

correct the problems.

Green light flashing: check if the boundary wire is connected correctly.

When the green light on the charging base is on, place your Landroid

M over the boundary wire, if Landroid

M follows the

boundary it is connected correctly.

If your Landroid

M is inside its territory but the display says “Outside working area” ,and the charger

base LED is green, it means you clamped the boundary wire ends incorrectly. Just reverse them.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Worx WG790E in the language / languages: English, German, Danish, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 23,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Worx WG790E

Worx WG790E Installation Guide - English, German, Danish, French, Italian, Polish, Portuguese, Spanish - 144 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Worx WG790E Manual

Product: