Manual Worx WG776E (page 11 of 144) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

619547

Zoom out

Zoom in

1/144

Cordless lawn mower EN

1110

INTENDED USE

This product is intended for domestic lawn

mowing.

ASSEMBLY

IMPORTANT! Before you assemble

the lawn mower, check the accessories

according above information, make sure the

accessories are completed.

1. FITTING THE HANDLE (See Fig. A1- A5)

1) Remove the screws (a) on the both side of

deck. (See Fig. A1)

2) Insert the Lower Handle Bar into the holes

on the deck. Be sure to carefully align the

screw holes found on the Lower Handles

with the screws holes found on the deck

(a). (See Fig. A1 A2)

3) Secure the Lower Handle Bars to the deck

with the screws provided (See Fig A2) .

4) Attach the Middle Handle (9) to the Lower

Handle with the Handle Knobs Assembly

(8). After this is complete, attach the Upper

Handle (1) to the Middle Handle with the

upper Handle Knobs (7) (See Fig. A3).

5) Tightening the two Handle Knobs. Check

that the handle is FULLY secured.

The cam lever pressure can be adjusted

by rotating the upper or the lower Handle

Knobs clockwise/counterclockwise (See Fig.

A4). DO NOT OVER TIGHTEN.

NOTE: Ensure that the bolts are fully

inserted through the handles before

adjusting or tightening the Handle Knobs.

6) First, insert the cable into the Cable Clips

(3) provided ensuring there is enough slack

cable to allow the handlebars to collapse

for storage. After inserting the cable, attach

the Cable Clips to the Upper and Middle

Handle bars (See Fig. A5)

NOTE: Make sure the cable is routed

underneath the Middle Handle Bar

(See Fig.A5).

2. GRASS COLLECTION BAG ASSEMBLY

Connect the grass box handle to the box top

as shown in Fig B1-B4.

Step 1. Press the front of the handle brieﬂy.

(See Fig. B2)

Step 2. Then push it forward. (See Fig. B2)

Step 3. Push down the back of the handle.

(See Fig. B2)

Step 4. Finally, clip the plastic clips over the

metal frame. (See Fig. B3)

WARNING: Don’t ﬁt the handle in

reversed direction. Fit the handle as

shown in Fig B1.

3. GRASS COLLECTION BAG FITTING

(See Fig. C1, C2, C3)

1) Turn the mower off, wait until blade stops

and remove safety key (6).

2) Pick up the grass collection bag by the

handle, and position grass collection bag

on the lower hooks (b) on the mower deck

(See Fig.C2).

3) Release the safety guard to lock the

grass bag into position. Ensure the grass

collection bag is installed securely

(See Fig. C3).

NOTE: Depress the grass collection bag

slightly to ensure that it is completely

installed.

4. REMOVING/EMPTYING

Hold the grass collection bag, lift the safety

ﬂap (10) and hold up. Remove grass collection

bag (4).

WARNING! Always check the safety

ﬂap can close the discharge outlet

tightly before using. Never lift the safety ﬂap

(10) when the lawn mower is being used

without ﬁtted grass collection bag.

5. FITTING/REMOVING BATTERY

(See Fig. D1, D2)

Depress the battery release button to release

battery pack from your mower (See Fig. D1).

After recharging, insert the battery pack into

mower’s battery port (See Fig. D2). A simple

push and slight pressure will be sufﬁcient.

NOTE: When removing the battery pack, hold

it ﬁrmly to avoid dropping and injury.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Worx WG776E in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Worx WG776E Manual

Product: