576047
43
Zoom out
Zoom in
Previous page
1/116
Next page
WG549E WG549E.3 WG549E.5
WG549E.9
P05
P14
P24
P34
P44
P54
P64
P74
P84
P94
P104
Cordless Li-Ion Blower/Sweeper
Gebläse/Kehrmaschine mit Lithiumbatterie
Souffleur/Balayeur à piles de Lithium
Soffiante/Spazzatrice con batteria al litio
Sopladora/Barredora con Batería de Litio
Lithiumbatterij Blazer/Veger
Bezprzewodowa dmuchawa/zamiatarka z akumulatorem Li-Jon
Zsinór nélküli, lítium-ion elemmel működő porszívós seprű
Ventilator/Aspirator cu baterie din Li-Ion fără cablu
Bezdrátový Li-Ion foukač/zametač
Akumulátorový (lítiovo-iónový) vysávač/dúchadlo
EN
D
F
I
ES
NL
PL
HU
RO
CZ
SK
Original instructions EN
Originalbetriebsanleitung D
Notice originale F
Istruzioni originali I
Manual original ES
Oorspronkelijke gebruiksaanwijzing NL
Instrukcja oryginalna PL
Eredeti használati utasítás HU
Instrucţiuni originale RO
Překlad CZ
Preklad SK
1
2
3
4
5
6
A
B C D
E
Cordless Li-Ion Blower/Sweeper EN
5
1. HANDLE
2. ON/OFF SWITCH
3. TUBE RELEASE BUTTON
4. BLOWER TUBE
5. BATTERY PACK
6. BATTERY PACK RELEASE BUTTON (See Fig. C)
Not all the accessories illustrated or described are included in standard delivery.
Cordless Li-Ion Blower/Sweeper EN
6
TECHNICAL DATA
Type WG549E WG549E.3 WG549E.5 WG549E.9 (520-559-designation of machinery,
representative of Cordless Blower Vacuum)
WG549E WG549E.3 WG549E.5 WG549E.9
Voltage 20V
Max* Lithium
No load speed 12500/min
Blow speed 200km/h
Charging time 3hr approx. 2hr approx. 1hr approx. /
Machine weight 1.6kg 1.9kg 1.6kg 1.2kg
*Voltage measured without workload. Initial battery voltage reaches Maximum of 20volts.
Nominal voltage is 18volts.
NOISE INFORMATION
A weighted sound pressure L
pA
:74dB(A)
A weighted sound power L
wA
:85dB(A)
K
pA
& K
wA
3.0dB(A)
Wear ear protection
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745
Typical weighted vibration 1.96m/s²
The declared vibration total value may be used for comparing one tool with another, and may
also be used in a preliminary assessment of exposure.
WARNING: The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on the
following examples and other variations on how the tool is used:
How the tool is used and the materials is cut or drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of exposure level in the actual conditions of use
should also take account of all parts of the operating cycle such as the times when the tool
Cordless Li-Ion Blower/Sweeper EN
7
is switched off and when it is running idle but not actually doing the job. This may significantly
reduce the exposure level over the total working period.
Help to minimize your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate).
If the tool is to be used regularly then invest in anti vibration accessories.
Avoid using tools in temperatures of 10
o
C or less.
Plan your work schedule to spread any high vibration tool use across a number of days.
ACCESSORIES
WG549E WG549E.3 WG549E.5 WG549E.9
Battery pack 1(WA3551.1) 1(WA3553) 1(WA3551.1) /
Charger 1(WA3760) 1(WA3860) 1(WA3860) /
We recommend that you purchase your accessories from the same store that sold you the tool.
Use good quality accessories marked with a well-known brand name. Choose the type according
to the work you intend to undertake. Refer to the accessory packaging for further details. Store
personnel can assist you and offer advice.
Cordless Li-Ion Blower/Sweeper EN
8
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING! Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for
future reference.
The term “power tool” in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1. WORK AREA SAFETY
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in
explosive atmospheres, such as in the
presence of flammable liquids, gases
or dust. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose control.
2. ELECTRICAL SAFETY
a) Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power tools.
Unmodified plugs and matching outlets
will reduce risk of electric shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric shock
if your body is earthed or grounded.
c) Do not expose power tools to rain or
wet conditions. Water entering a power
tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep cord
away from heat, oil, sharp edges or
moving parts.
Damaged or entangled cords increase the
risk of electric shock.
e) When operating a power tool
outdoors, use an extension cord
suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of
electric shock.
f) If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected
supply. Use of an RCD reduces the risk of
electric shock.
3. PERSONAL SAFETY
a) Stay alert, watch what you are
doing and use common sense when
operating a power tool. Do not use
a power tool while you are tired or
under the influence of drugs, alcohol
or medication. A moment of inattention
while operating power tools may result in
serious personal injury.
b) Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing
protection used for appropriate conditions
will reduce personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or
battery pack, picking up or carrying
the tool.
Carrying power tools with your finger on
the switch or energising power tools that
have the switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a rotating
part of the power tool may result in
personal injury.
e) Do not overreach. Keep proper
footing and balance at all times. This
enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose
clothing or jewellery. Keep your hair
and clothing away from moving parts.
Loose clothes, jewellery or long hair can be
caught in moving parts.
g)
If devices are provided for the
connection of dust extraction and
collection facilities, ensure these are
connected and properly used. Use of dust
collection can reduce dust-related hazards.
Cordless Li-Ion Blower/Sweeper EN
9
4. POWER TOOL USE AND CARE
a) Do not force the power tool. Use
the correct power tool for your
application. The correct power tool will
do the job better and safer at the rate for
which it was designed.
b) Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be controlled
with the switch is dangerous and must be
repaired.
c) Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories,
or storing power tools. Such preventive
safety measures reduce the risk of starting
the power tool accidentally.
d) Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect the power
tool’s operation. If damaged, have the
power tool repaired before use. Many
accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
g) Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
5. BATTERY TOOL USE AND CARE
a) Recharge only with the charger
specified by the manufacturer. A
charger that is suitable for one type of
battery pack may create a risk of fire when
used with another battery pack.
b) Use power tools only with specifically
designated battery packs. Use of any
other battery packs may create a risk of
injury and fire.
c) When battery pack is not in use, keep
it away from other metal objects, like
paper clips, coins, keys, nails, screws
or other small metal objects, that can
make a connection from one terminal
to another. Shorting the battery terminals
together may cause burns or a fire.
d) Under abusive conditions, liquid
may be ejected from the battery;
avoid contact. If contact accidentally
occurs, flush with water. If liquid
contacts eyes, additionally seek
medical help. Liquid ejected from the
battery may cause irritation or burns.
6. SERVICE
a) Have your power tool serviced by
a qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
ADDITIONAL SAFETY
WARNINGS FOR CORDLESS
BLOWER
WARNING: Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for
future reference.
- This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
- Children should be supervised to ensure
that they do not play with the appliance.
1) TRAINING
a) Read the instructions carefully. Be familiar
Cordless Li-Ion Blower/Sweeper EN
10
with the controls and the proper use of the
appliance;
b) Never allow people unfamiliar with these
instructions to use the appliance. Local
regulations may restrict the age of the
operator;
c) Never operate the appliance while people,
especially children, or pets are nearby;
d) The operator or user is responsible for
accidents or hazards occurring to other
people or their property.
2) PREPARATION
a) While operating the appliance, always wear
substantial footwear and long trousers. Do
not operate the equipment when barefoot
or wearing open sandals;
b) Do not wear loose clothing or jewellery
that can be drawn into the air inlet. Keep
long hair away from the air inlets;
c) Wear protective goggles while operating;
d) To prevent dust irritation the wearing of a
face mask is recommended;
e)
Never operate the appliance with defective
guards or shields, or without safety devices.
3) OPERATION
a) Take off the battery from the appliance,
- When not in use;
- Before clearing a blockage;
- Before checking, cleaning or working on
the appliance;
- If the appliance starts to vibrate
abnormally.
b) Operate the appliance only in daylight or in
good artificial light.
c) Do not overreach and keep your balance at
all times.
d) Always be sure of your footing on slopes.
e) Walk, never run.
f) Keep all cooling air inlets clear of debris.
g) Never blow debris in the direction of
bystanders.
4) MAINTENANCE AND STORAGE
a) Keep all nuts, bolts and screws tight to
be sure the appliance is in safe working
condition.
b) Replace worn or damaged parts.
c) Use only genuine replacement parts and
accessories.
d) Store the appliance only in a dry place.
SAFETY WARNINGS FOR
BATTERY PACK
a) Do not dismantle, open or shred cells
or battery pack.
b) Do not short-circuit a battery pack. Do
not store battery packs haphazardly
in a box or drawer where they may
short-circuit each other or be short-
circuited by conductive materials.
When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a
connection from one terminal to another.
Shorting the battery terminals together
may cause burns or a fire.
c) Do not expose battery pack to heat or
fire. Avoid storage in direct sunlight.
d) Do not subject battery pack to
mechanical shock.
e) In the event of battery leaking, do not
allow the liquid to come into contact
with the skin or eyes. If contact has
been made, wash the affected area
with copious amounts of water and
seek medical advice.
f) Seek medical advice immediately
if a cell or battery pack has been
swallowed.
g) Keep battery pack clean and dry.
h) Wipe the battery pack terminals with
a clean dry cloth if they become dirty.
i) Battery pack needs to be charged
before use. Always refer to this
instruction and use the correct
charging procedure.
j) Do not maintain battery pack on
charge when not in use.
k) After extended periods of storage,
it may be necessary to charge
and discharge the battery pack
several times to obtain maximum
performance.
l) Battery pack gives its best
Soffiante/Spazzatrice con batteria al litio
I
43
DICHIARAZIONE DI
CONFORMITÀ
Noi,
POSITEC Germany GmbH
Konrad-Adenauer-Ufer 37
50668 Köln
Dichiara che l’apparecchi,
Descrizione WORX Soffiante/Spazzatrice
con batteria al litio
Codice WG549E WG549E.3 WG549E.5
WG549E.9
(520-559-designazione del macchinario
rappresentativo del Soffiante/Spazzatrice
con batteria al litio)
Funzione Soffiare detriti
È conforme alle seguenti direttive,
2006/42/EC,
2004/108/EC,
2011/65/EU,
2000/14/EC modificata dalla 2005/88/EC
2000/14/EC modificata dalla 2005/88/EC
- Procedura di conformità come da
Annex V
- Potenza acustica pesata 85dB(A)
- Massima potenza di rumore garantita
88dB(A)
Conforme a,
EN 60745-1 EN 55014-2
IEC 60335-2-100 EN ISO 3744
EN 15503 EN 55014-1
Il responsabile autorizzato alla compilazione
della documentazione tecnica,
Nome Russell Nicholson
Indirizzo Positec Power Tools (Europe)
Ltd, PO Box 152, Leeds, LS10 9DS, UK
Suzhou
2014/12/15
Allen Ding
Vice capo ingegnere, testing e certificazione
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worx WG594E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worx WG594E in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info