Manual Worx WG368E.9 (page 14 of 204) (English, German, Dutch, French, Italian, Polish, Spanish)

576045

Zoom out

Zoom in

1/204

Cordless Chain Saw EN

SYMBOLS

INTENDED USE

The chain saw is intended for sawing of trees,

tree trunks, branches, wooden beams, planks,

etc. Cuts can be sawed with or across the

grain. This product is not suitable for sawing

mineral materials.

ASSEMBLY

WARNING! Before touching

the chain or making any other

adjustments, make sure that the tool is

switched off and the battery is removed.

Always use gloves when handling the

chain.

CHAIN AND GUIDE BAR ASSEMBLY

1. Unpack all parts carefully.

2. Place the chain saw on any suitable ﬂat

surface.

3. Use only genuine WORX chains designed

for chainbar.

4. Slide the Chain (8) in the slot around the

Guide Bar (7). Ensure the Chain is in correct

running direction by comparing it to the

Chain Direction Symbol (13) found on

the saw body (See Fig. B). Ensure the Bar

Tensioning Plate (17) is facing outward.

(See Fig. A)

5. Fit the Chain onto the Drive Sprocket

(12), so that the Fastening Bar Bolt (16)

and the two Bar Locating Tabs (14) on the

Bar Clamp (20) ﬁt into the keyway of the

opening on the Guide Bar (7). (See Fig. B)

6. Check to see if all parts are seated properly.

(See Fig. C)

7. Fit the Chain Cover (11), ensure that the

Chain Catch (19) slides properly into the

Chain Cover (11). (See Fig. D)

8. Tighten the Chain Cover (11) by turning the

Chain Tensioning Knob (10) clockwise until

it is tight. (See Fig. E)

WARNING: The chain is not yet

tensioned. Tensioning the chain

applies as described under “Tensioning

chain”. The chain now needs to be

inspected to make sure it is properly

tensioned.

WARNING

To reduce the risk of injury, user

must read instruction manual

Wear ear protection

Wear eye protection

Wear dust mask

Do not expose to moisture.

Do not expose to rain or water

Do not burn

Do not dispose of batteries. Return

exhausted batteries to your local

collection or recycling point.

This product has been marked

with a symbol relating to removing

electric and electronic waste. This

means that this product shall not

be discarded with household waste

but that it shall be returned to a

collection system which conforms

to the European Directive 2002/96/

CE. It will then be recycled or

dismantled in order to reduce the

impact on the environment. Electric

and electronic equipment can be

hazardous for the environment and

for human health since they contain

hazardous substances.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Worx WG368E.9 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 8,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Worx WG368E.9 Manual

Product: