576041
12
Zoom out
Zoom in
Previous page
1/64
Next page
12
Cordless Lawn Trimmer/Lawn Edge Trimmer
EN
ASSEMBLY
1. ASSEMBLY OF THE MAIN HANDLE
(See Fig. A1, A2)
Align and insert the shaft into the upper
housing until a click can be heard. Make sure
the grooves are correctly matched. (See Fig.
A1). Tighten the shaft locking knob in the
direction indicated to lock (See Fig. A2).
NOTE: Make sure that the handle is
firmly locked in place
2. ASSEMBLY OF THE AUXILIARY
HANDLE (See Fig. B1, B2)
Slide the auxiliary handle onto the grooves
of auxiliary handle support until a click can
be heard. And make sure the auxiliary handle
locking clamp is closed. (See Fig. B1)
NOTE: Make sure the handle is firmly
secured in place.
If the handle is loose, then tighten the 2 side
screws. (See Fig. B2)
3. ASSEMBLY OF THE SAFETY GUARD
(See Fig. C1, C2, C3)
Remove the screw from the bottom of the
trimmer head - then attach the safety guard to
the housing.
Secure the guard in place by the refitting of
the screw.
Remove the line cutter protection tape.
(See Fig. C3)
OPERATION INSTRUCTIONS
INTENDED USE
The machine is intended for the cutting of
grass and weeds under bushes, as well as on
slopes and edges that can not be reached with
the lawn mower.
WARNING! The charger and battery
pack are specially designed to work
together so do not attempt to use any other
devices. Never insert or allow metallic objects
into your charger or battery pack connections
because of an electrical failure and hazard will
occur.
1. BEFORE USING YOUR CORDLESS
GRASS TRIMMER
The battery pack included is shipped
UNCHARGED. You must charge before first
use.
The battery charger supplied was designed to
only charge the Li-Ion battery also supplied.
Do not use another battery charger.
2. CHARGING YOUR BATTERY PACK
The Li-Ion battery is protected against deep
discharging. When the battery is empty,
the machine will switch off by means of a
protective circuit: The trimmer head no longer
rotates.
NOTE: In a warm environment or after
heavy use, the battery pack may become
too hot to permit charging. Allow time
for the battery to cool down before
recharging.
3. TO REMOVE OR INSTALL BATTERY
PACK (See Fig. D1, D2)
Depress the battery release button to release
battery pack from your trimmer (See Fig. D1).
After recharging, insert the battery pack into
trimmers battery port (See Fig. D2). A simple
push and slight pressure will be sufficient until
a click is heard.
NOTE: When removing the battery pack,
hold it firmly to avoid dropping and
injury.
4. BATTERY STATUS LED’S (See Fig. E )
NOTE: The Status LED’s will indicate the
battery condition when the button on the
battery is pressed.
The LED’s constantly senses and displays the
battery condition as follows:
Press the button “POWERTEST”, the light
button is illuminated.
When the three green lights are illuminated,
the battery is in a highly charged condition.
When two lights (
) are illuminated, the
battery is in a moderately charged condition.
When only one green light ( ) is illuminated,
the battery charge is depleted.
IMPORTANT: When only one light is
illuminated, your battery is overly
discharged, even though the trimmer
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worx WG168E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worx WG168E in the language / languages: English, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 3,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Worx WG168E

Worx WG168E User Manual - English - 104 pages

Worx WG168E User Manual - English - 20 pages

Worx WG168E User Manual - English - 148 pages

Worx WG168E User Manual - German - 104 pages

Worx WG168E User Manual - German - 148 pages

Worx WG168E User Manual - Dutch - 104 pages

Worx WG168E User Manual - Dutch - 148 pages

Worx WG168E User Manual - French - 104 pages

Worx WG168E User Manual - French - 148 pages

Worx WG168E User Manual - Italian - 104 pages

Worx WG168E User Manual - Italian - 148 pages

Worx WG168E User Manual - Polish - 104 pages

Worx WG168E User Manual - Polish - 148 pages

Worx WG168E User Manual - Portuguese, Spanish - 104 pages

Worx WG168E User Manual - Spanish - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info