779778
17
Zoom out
Zoom in
Previous page
1/23
Next page
Cleaning and maintenance
17
Cleaning and maintenance
WARNING!
Risk of injury!
Improper cleaning and maintenance of the demolition breaker can lead to
injury.
Pull the mains plug out of the socket before cleaning and maintaining it.
Remove the insertion tool before cleaning.
Regularly maintain the demolition breaker and have necessary maintenance
and repair work performed without delay.
Never submerge the demolition breaker in water or other liquids.
Make sure that no water or other liquids penetrate the housing.
NOTICE!
Risk of damage!
Cleaning the demolition breaker with unsuitable cleaners could damage it.
Never clean the compressor with solvents or similar.
Do not use any aggressive cleaners or sharp or metallic cleaning utensils
such as knives, hard scrapers or similar. They could damage the surfaces.
Never use a high-pressure cleaner to clean the demolition breaker.
Keep all protective devices, vents and the motor housing as free of dust
and dirt as possible.
1. Switch the demolition breaker off and pull the mains plug out of the mains socket.
2. Wipe the washer and the insertion tool off 9 / 10 with a slightly dampened
cloth.
3. Then dry all of the parts thoroughly.
4. Clean the vents with a soft brush or paintbrush.
Replacing the carbon brushes
The carbon brushes 13 may only be replaced by a specialist workshop or qualified
specialist personnel.
Always have both carbon brushes replaced at the same time.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Workzone Z1G-DS-65D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Workzone Z1G-DS-65D in the language / languages: English as an attachment in your email.

The manual is 1.51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info