779778
13
Zoom out
Zoom in
Previous page
1/23
Next page
Safety
13
Safety instructions for the mains connection
Do not use the demolition breaker in wet rooms or in areas where work is
performed with spraying water or in the rain.
Only connect the demolition breaker if the mains voltage of the socket
corresponds to the operating voltage as indicated on the machine’s rating
plate.
Only connect the demolition breaker to an easily accessible socket so that
you can quickly disconnect it from the power supply in the event of a fault.
Always pull the mains cord out of the socket before adjusting the settings
or conducting any maintenance work.
Do not use any adapter plugs in combination with power tools with
protective earthing. Plugs that have not been modified and sockets with
the proper fit reduce the risk of an electric shock.
Lay the mains cord so that it does not pose a tripping hazard.
Always position the mains cord to the rear away from the demolition breaker.
Do not kink the mains cord and do not lay it over sharp edges.
Do not carry the demolition breaker by the mains cord and do not hang it
up by the mains cord.
Do not use the demolition breaker if the mains connection line or the
mains plug is damaged. If the mains connection line is damaged, it must
be replaced by the manufacturer or an electrician to avoid risks.
Connect the demolition breaker using a RCD switch with a release current
of no more than 30 mA.
With respect to outdoor use, only use an extension cord which is approved
for outdoor use.
Supplementary safety instructions
Only work with the appropriate insertion tools. Check that the insertion
tool is positioned correctly by pulling on it.
For tasks carried out above ground level: Ensure that the area below is
clear for tasks carried out above ground level.
Check the demolition breaker and the insertion tool for rust and damage
before each use. Never operate the demolition breaker if it is damaged
or deformed. If you identify damage, contact our After Sales Support
immediately at the service address indicated on the warranty card.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Workzone Z1G-DS-65D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Workzone Z1G-DS-65D in the language / languages: English as an attachment in your email.

The manual is 1.51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info