724649
6
Zoom out
Zoom in
Previous page
1/18
Next page
AFTER SALES SUPPORTe-mail: help@powertoolsupport.com
1800 909 909 (toll free)MODEL No.: DBAF50/40 • 61420 • 07/2018
AFTER SALES SUPPORTe-mail: help@powertoolsupport.com
1800 909 909 (toll free)MODEL No.: DBAF50/40 • 61420 • 07/2018
10 11
6. Service
a. Have your power tool serviced by a qualied repair person
using only identical replacement parts. This will ensure that the
safety of the power tool is maintained.
7. Safety notes for battery/charger.
a. Keep the charger away from rain or damp conditions. Water entering
into the charger will increase the risk of an electrical shock.
b. Only use chargers recommended by the manufacturer to recharge
the battery. There is a risk of re if it is used with other batteries.
c. Never use to recharge third-party batteries. The charger is only
designed to charge the supplied batteries (Li-Ion) using the voltages
specied in the Technical Data. Otherwise there is a risk of re or
explosion.
d. Keep the charger clean. Contamination will increase the risk of an
electrical shock.
e. Check the charger, cable and plug each time you use the unit. Do
not use the charger if you nd any damage. Never open the charger up
yourself, have it repaired by a qualied specialist only and with original
replacement parts.
A damaged charger, cable or plug will increase the risk of an electrical
shock.
f. Never operate the charger on a surface that will burn easily (for
example, paper, textiles etc) or in a ammable environment. There is a
risk of re occurring as a result of the heat generated during the charging
process.
g. Fluid can escape from the battery when used incorrectly. Avoid all
contact with this. In the event of accidental contact, rinse with water. If
liquid should get into the eyes, get medical assistance. Battery uid may
result in skin irritations and burns.
h. Do not open the battery. There is a risk of short-circuiting.
i. Protect the battery from heat, for example, from constant sun and
re. There is a risk of explosion.
j. Never short circuit the battery. There is a risk of explosion.
k. In the event of damage and incorrect use, vapours may come out of
the battery. Ensure your work space is well ventilated with fresh air and, if
you have any symptoms, consult a doctor. These vapours may irritate the
respiratory system.
Safety Rules for Nailers / Staplers
Always assume that the tool contains nails or staples. Careless handling of
the nailer can result in unexpected ring of nails or staples and personal
injury.
Do not point the tool towards yourself or anyone nearby. Unexpected
triggering will discharge the nail or staple causing an injury.
Do not actuate the tool unless the tool is placed rmly against the
workpiece. If the tool is not in contact with the workpiece, the nail or staple
may be deected away from your target.
Disconnect the tool from the power source when the fastener jams in the
tool. While removing a jammed fastener, the tacker may be accidentally
activated if it is plugged in.
Use caution while removing a jammed nail or staple. The mechanism may
be under compression and the nail or staple may be forcefully discharged
while attempting to free a jammed condition.
Do not use this nailer for fastening electrical cables. It is not designed for
electric cable installation and may damage the insulation of electric cables
thereby causing electric shock or re hazards.
Hold power tool by insulated gripping surfaces, when performing an
operation where the nail or staple may contact hidden wiring. Nails or
staples contacting a “live” wire may make exposed metal parts of the
power tool “live” and could give the operator an electric shock.
Know your power tool. Read operator’s manual carefully. Learn its
applications and limitations, as well as the specic potential hazards
related to this power tool. Following this rule will reduce the risk of electric
shock, re, or serious injury.
Always wear eye protection with side shields marked to comply with ANSI
Z87.1. Everyday glasses have only impact resistant lenses. They are not
safety glasses. Following this rule will reduce the risk of serious personal
injury.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Workzone TG212T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Workzone TG212T in the language / languages: English as an attachment in your email.

The manual is 1,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info