724661
17
Zoom out
Zoom in
Previous page
1/30
Next page
Air Brush Kit
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com 1800 909 909
MODEL: №. TG212 07/2017 53633 (toll free)
AFTER SALES SUPPORT
(toll free)
Air Brush Kit
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. TG212 • 07/2017 • 53633
15
Acrylic paints cannot be dissolved in water and therefore should only be
used for more permanent applications and when the user is familiar with
the Air Brush Kit.
NOTE: Care must be taken when using acrylic paints, as solvents will be
required for cleaning.
Preparing the Air Brush Gun
This air brush kit contains 2 x paint vessels for use with the air brush gun
(15), and is fitted with a general purpose nozzle of 0.35mm.
a) 20cc Glass paint jar (12)
b) 5cc Metal paint cup (14)
Installing the 20cc Glass jar (12):
1. When using the 20cc glass paint jar (12), push
it up into the paint inlet connection (21) tightly
until it is secure (Fig J). The glass paint jar is held
in position by pressure / friction.
NOTE: The 20cc glass paint jar (12) has a vent
hole (13) to allow air to enter the glass jar which
enables fluid to flow into the air brush gun.
Ensure it is clean and not blocked (Fig K).
2. Open the lid of the glass paint jar and ll with
the selected paint after thinning appropriately
according to the paint manufacturer guidelines.
Be careful not to overfill.
Installing the 5CC metal paint cup (14):
1. When using the 5cc metal paint cup (14), push it up into the paint inlet
connection (24) tightly until it is secure (Fig L). The 5cc metal paint cup
(14) is held in position by pressure / friction.
2. Fill the metal cup (10) with the selected paint after thinning appropriately
according to the paint manufacturer guidelines. Be careful not to overfill.
NOTE: The 5cc metal paint cup (14) has no lid so care must be taken not
to spill the paint from the metal cup both during use and also filling.
J.
K.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Workzone TG212 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Workzone TG212 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info