724661
14
Zoom out
Zoom in
Previous page
1/30
Next page
Air Brush Kit
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com 1800 909 909
MODEL: №. TG212 • 07/2017 • 53633 (toll free)
12
AFTER SALES SUPPORT
(toll free)
Air Brush Kit
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. TG212 07/2017 53633
Getting Started – Air Compressor
NOTE: Before operating, make sure the Air Compressor is: in a well
ventilated area; on a level surface; well away from flammable objects.
Never paint in an area without proper ventilation or near potential ignition
sources.
1. The fittings on each end of the braided hose (10) are the same. Connect
one of these fittings to the air outlet fitting (7) connection on the
compressor. Align the threads and tighten the fitting in a clockwise
direction finger tight till firm (Fig A).
2. Connect the remaining fitting on the braided hose (7) to the air brush
inlet fitting (24). Align the thread and screw in a clockwise direction finger
tight until firm (Fig B).
3. Make sure the on/o switch (1) is in the OFF position as indicated by an
“O” on the on/o switch (Fig C).
4. Plug the power cord (2) into a mains socket (Fig D).
5. Turn the on/o switch (1) on the compressor to the ON position as
indicated by an “I” on the on/off switch (Fig E).
NOTE: The compressor automatically runs when the pressure at the
pressure switch falls below 43.5 PSI.
When the pressure at the pressure switch reaches 57 PSI the compressor
will stop.
6. The outlet pressure is controlled by the air outlet regulator (29) which can
be adjusted up or down, from zero PSI to Max 57 PSI, depending on the
operator’s requirement. The pressure gauge is an indication of the outlet
pressure, and should be read with air flowing through the air brush to
indicate a true reading (Fig F).
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Workzone TG212 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Workzone TG212 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info