724638

Workzone S1B-DW01 Manual

10
Zoom out
Zoom in
Previous page
1/15
Next page
220W 3-in-1 Multi Purpose Sander
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL No.: S1B-DW01-220W • 09/2018 • 61865
(toll free)
AFTER SALES SUPPORT
(toll free)
220W 3-in-1 Multi Purpose Sander
e-mail: help@powertoolsupport.com1800 909 909
MODEL No.: S1B-DW01-220W • 09/2018 • 61865
16 17
Attaching sanding sheets without using Velcro
NOTE: Make sure the holes on the sandpaper are aligned with the holes on
the sander base plate. This ensures maximum dust removal and allows air
ow from the motor.
1. Open the two clamping levers (8) (Fig L).
2. Push the sanding sheet under the open clamping rail (10) at one end and
clamp it rmly in place with the clamping lever (8) (Fig M).
3. Follow the same procedure at the other end of the sander to secure the
other end of the sanding sheet.
Dust extraction
WARNING! RISK OF FIRE!
When working with power tools that have a dust collection box or
can be connected to a vacuum cleaner via an adaptor, there is a risk
or re! In unfavourable conditions, e.g. when sparks are ying while sanding
metal or metal residues in wood, wood dust in the dust bag (or in the bag
of the vacuum cleaner) can spontaneously ignite. This is a particular risk
if the wood dust is mixed with paint residues or other chemicals and the
workpiece has become hot after being worked for a long time. Therefore,
do not allow the workpiece to overheat and always empty the dust box or
the dust bag of the vacuum cleaner before taking a break from work.
NOTE: Always wear a dust mask.
NOTE: Perforated sanding sheets are required for dust extraction i.e with
holes in the sandpaper
Preparation Preparation
Fitting the Dust collection box
WARNING! Always remove the plug from the mains power socket
before carrying out any work on the sander.
1. To connect the dust collection box (6) simply push it onto the adaptor
tting port (2) as far as it will go (Fig N). You will hear a click when the
release button for dust box (7) engages with the adaptor tting port (2).
2. To remove the dust collection box (6) press the release button for dust
box (7) and pull it o backwards from the adaptor tting port (2).
NOTE: To achieve optimum dust extraction, clean the dust collection box
(6) regularly. Refer to the maintenance section for further detail.
Using the Reducer for external extraction appliances
WARNING! Always remove the plug from the mains power socket
before carrying out any work on the sander.
Connecting the Reducer for external extraction appliances
1. Push the reducer for external extraction appliance (3) into the adaptor
tting port (2) until it is secure (Fig O).
2. Push the hose of a suitable workshop vacuum cleaning or dust extraction
machine / onto the reducer for external extraction appliance (3) (Fig P).
NOTE: The reducer for external extraction appliance (3) will t the
majority of dust extraction / vacuum appliances.
3. To remove the reducer for external extraction appliance (3), rstly
disconnect the hose of the vacuum cleaner / dust extraction appliance
from the reducer for external extraction appliance (3).
4. Remove the reducer for external extraction appliance (3) from the
adaptor tting port (2).
L.
N. O. P.
M.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Workzone S1B-DW01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Workzone S1B-DW01 in the language / languages: English as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info