584955
12
Zoom out
Zoom in
Previous page
1/20
Next page
12
WGG-800www.servotool.eu0203-5142281
GB 1800-719901
IRL
AFTER SALES SUPPORT
WGG-800www.servotool.eu0203-5142281
GB
1800-719901
IRL
AFTER SALES SUPPORT
6 Months or 100 hrs
• Clean fuel tap and fuel tank filter. Replace if necessary.
• Check fittings and fasteners. Replace if necessary.
12 Months or 300 hrs
• Contact a specialized service centre to check the valve clearance.
• Check the fan of the cooling system for damage.
Spark plug inspection
Fig. 2
• Disconnect the spark plug cap, and remove any dirt from around the spark plug
area.
• Remove spark plug (10) with the plug spanner supplied.
• Inspect the base of the spark plug. It should be a tan colour.
• Measure the gap (distance contact point) with a suitable gauge. The gap should be
0,7 - 0,8 mm. Correct the gap, if necessary, by carefully bending the side electrode.
• Replace the spark plug if the electrodes are worn, or if the insulator is cracked or
chipped.
• Install the spark plug carefully, by hand, to avoid cross-threading.
• Tighten the spark plug to the correct torque: 20 Nm.
• Attach the spark plug cap.
Exhaust screen
• Wait for exhaust to cool.
• Exhaust screen may be blocked up with carbon deposits.
• Undo the screw cap and remove the exhaust screen.
• Clean the screen with a wire brush and refit.
• Replace exhaust screen if damaged.
Air filter cleaning
• Remove the air filter cover (9).
• Remove filter element and wash thoroughly in solvent.
• Pour a small amount of oil onto the filter element and gently squeeze out any
excess oil.
• Replace the filter element and air filter cover.
• Be sure the filter cover seals properly all around.
Do not run the engine without the air filter element in place.
Never place a wet filter (with solvent) on the machine.
PGM6003 Ma EN-IRL 1202-15.indd 12 2/15/12 9:35 AM
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Workzone PGM6003 - PGG-800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Workzone PGM6003 - PGG-800 in the language / languages: English as an attachment in your email.

The manual is 5,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info