724626
10
Zoom out
Zoom in
Previous page
1/24
Next page
Air Compressor
AFTER SALES SUPPORT
(toll free)MODEL No.: PAP110 • 02/2019 63569
e-mail: info.aldi@positecgroup.com
AUS
8
1300 889 028
AUS
Connecting adapters to the valve adapter / connector
WARNING: Ensure the air compressor is switched off and
disconnected from the mains power supply before undertaking
any assembly.
1. Choose the adapter required for the task to be undertaken.
2. To connect an adapter to the hose with valve adapter/connector
(10), first press the air gun release valve (23), then insert the required
adapter into the hose end and release the release valve (23) (Fig D).
Make sure that the adapter is locked in firmly.
3. When connecting the universal adapter (11), screw-on valve
adapter (12) or the deflating adapter (13), these adapters must first
be connected to the nozzle adapter to suit 3-piece nozzle set (8). To
do this, insert the either of the : universal adapter (11), screw-on valve
adapter (12) or the deflating adapter (13), through the rear of the
nozzle adapter to suit 3-piece nozzle set (8) (Fig E). Ensure that the
fitting is secure, then insert the nozzle adapter to suit 3-piece nozzle
set into the hose with valve adapter/connector (10) by pressing the air
gun release valve (23) and inserting into the hose end. Release pressure
on the air gun release valve (23) and ensure the fitting is secure.
To remove the adapter, press down the air gun release valve (23) and
pull the relevant adapter outwards.
Disconnecting the compressure air hose, air gun with pressure
gauge & hose with valve adapter/connector
1. To disconnect the compressed air hose (9) from the quick-lock
coupling (5), pull the sleeve on the quick-lock coupling backwards, and
pull the compressed air hose (9) away from the quick-lock coupling (5).
E
D
1
2
Assembly
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Workzone PAP110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Workzone PAP110 in the language / languages: English as an attachment in your email.

The manual is 2,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info