724653
19
Zoom out
Zoom in
Previous page
1/22
Next page
3600W Digital Inverter with Pure Sine Wave
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. INF3800A-1 • 03/2018 • 59905
(toll free)
AFTER SALES SUPPORT
(toll free)
3600W Digital Inverter with Pure Sine Wave
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. INF3800A-1 • 03/2018 • 59905
34 35
WARNING: Ensure the engine is switched o while undertaking this task.
NOTE: The following procedure should be performed in a well ventilated
area, with no naked ames, sparks, or cigarettes.
NOTE: Safety glasses should also be worn and on/o switch (4) set to the
OFF position.
1. Ensure the fuel tap / lever (26) is in the OFF position (Fig AG).
2. Hold the tap housing and loosen the bottom sediment cup using an
11mm spanner (not supplied) (Fig AJ).
Remove the sediment cup from the bottom of the fuel tap / lever (26) (Fig
AK). Be careful not to move the tap housing. Do not lose the small seal on
the thread of the sediment cap.
3. The lter inside the sediment cup can be cleaned in petrol to remove any
build-up of dirt on the outside of the lter. Do not operate the generator
without this lter in place.
4. After cleaning the lter, replace the seal, then the lter, on top of the
sediment cap and then insert the assembly back on the bottom of the
fuel tap / lever (26) (Fig AL), and secure nger tight in an anti-clockwise
direction. Using an 11mm spanner (not supplied), secure the sediment
cap until tight (Fig AK).
5. Rell the tank with fuel and ensure there are no leaks between the tap
and the tank, the tap and the sediment cap, and with the fuel tap / lever
(26) turned on, ensure there are no leaks where the fuel hose is tted to
the outlet of the tap.
Maintenance Cleaning/Warranty
AK.AJ. AL.
LOOSEN TIGHTEN
1. Keep your machine clean. The outside of the machine can be cleaned
using a damp soft cloth with a mild detergent if required. Never use water
to clean the generator as it may cause damage to internal parts.
2. Some maintenance products and solvents may damage the plastic parts;
these include products containing benzene, trichloroethylene, chloride
and ammonia.
3. Use a vacuum to clean air inlet and outlet louvres of the alternator.
4. Take special care to keep the ventilation inlets/outlets free from
obstruction; cleaning with a soft brush followed by a compressed air jet
will usually be sucient to ensure acceptable internal cleanliness.
5. Wear eye protection when carrying out cleaning.
Your new Workzone® Titanium Generator will more than satisfy your
expectations.
It has been manufactured under stringent Workzone® Titanium Quality
Standards to meet superior performance criteria.
You will nd your new Generator easy and safe to operate, and, with proper
care, it will give you many years of dependable service.
CAUTION. Carefully read through this entire instruction manual before
using your new Workzone® Titanium Generator .
Take special care to heed the Cautions and Warnings.
Your Workzone® Titanium Generator has many features that will make your
job faster and easier. Safety, performance, and dependability have been
given top priority in the development of this Generator, making it easy to
maintain and operate.
Use only Workzone® Titanium replacement parts for your product.
Non-conforming parts or modications made to parts will void
your warranty.
Tap Outlet Fuel Filter Cleaning
Warranty
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Workzone INF3800A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Workzone INF3800A in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info