575846
4
Zoom out
Zoom in
Previous page
1/11
Next page
6 7
AFTER SALES SUPPORT 0800 / 328 6020 info@dariolondon.com
00800 / 4467 5888
GT-DC-02, 02/13, E45316
AFTER SALES SUPPORT 0800 / 328 6020 info@dariolondon.com
00800 / 4467 5888
GT-DC-02, 02/13, E45316
Functions
1. The zero setting in any position simplifies stage measurements.
Press the zero gauge (ZERO) in order to define the zero point.
This enables difference measurements (negative measurements
are displayed with a „- “).
2. Inch/mm conversion in any position. Press the mm/inch key in
order to display the measurement result in a different unit.
3. For very precise measurements, the caliper gauge can be
operated particularly precisely using the fine-tuning wheel.
4. Automatic and manual power switch-on/switch-off.
Maintenance/Storage
1. Prior to use, clean the surface of the measuring scale with a dry
and clean cloth (or a light cleaning oil). Protect the measuring
scale from watery liquid.
2. Only clean with a dry cloth and some cleaning oil; do not use
any water, solvent or abrasive detergent.
3. Remove the battery if the instrument is not being used for a
longer period of time.
4. Preferably store the caliper gauge in the case in order to provide
optimum protection.
Use
1. Preparation:
(1) Wipe of the surface of the measuring scale and clean the
measuring surfaces.
(2) Loosen and move the safety screw, check the ease of movement
over the entire measuring range.
(3) Insert battery as described on page 8.
(4) Switch on device and check whether the LCD display and all keys
function faultlessly.
2. Measurement:
(1) Press the On/Off key in order to switch on the power. The device is
also switched on by activating the caliper gauge.
(2) Press mm/inch key in order to select the required unit of measure.
(3) Move the slider until the outer measurement surfaces touch
lightly, then press the zero gauge (ZERO) in order to start the
regular measurement. With the safety screw, you can fix the
caliper gauge in order to ensure the measurement result.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Workzone GT-DC-02 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Workzone GT-DC-02 in the language / languages: English as an attachment in your email.

The manual is 2,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Workzone GT-DC-02

Workzone GT-DC-02 User Manual - German, French, Italian - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info