724601
17
Zoom out
Zoom in
Previous page
1/28
Next page
Xfinity Li-ION 20V
Instruction Manual
IMPORTANT
Read carefully before use
Keep for future reference
MODEL NUMBER
CSJ18LDA.9
Version number: 002
Multi-PURPOSE saw
2
2
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
CSJ18LDA.9 • 11208 • 10/2019
Welcome
Congratulations in choosing to buy a Workzone® Titanium 20V Multi-
Purpose Saw (battery / charger not included).
All products bought to you by Workzone® Titanium are manufactured
to the highest standards of performance and safety and, as part of our
philosophy of customer service and satisfaction, are backed by our
comprehensive 5 Year Warranty. We hope you will enjoy your purchase
for many years to come.
When you open your packaging, rst remove all items and check there
are no parts damaged or missing. If you nd anything wrong, do not
operate the product until the parts have been replaced or the fault has
been rectied. Failure to do so could result in serious personal injury.
3
3
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
CSJ18LDA.9 • 11208 • 10/2019
The product is guaranteed to be free from defects in workmanship and parts for a period of 60 months from the
date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired,
replaced or refunded at our discretion. T
conferred by this warranty are in addition to all rights and
remedies in respect of the product that the consumer has under the Competition and Consumer Act 2010 and
similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled
to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality
and the failure does not amount to a major failure.
Warranty Details
REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration/ TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION
20V Multi-Purpose Saw
4
4
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
CSJ18LDA.9 • 11208 • 10/2019
Contents
Application 5
Package Content List 5
Parts description 6
Description of symbols 7
General safety warnings 8
Important information – Product care 13
Assembly 13
Operation 18
Maintenance 21
Warranty 22
Environmental protection 23
FAQ/Troubleshooting 23
Technical specications 25
5
5
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
CSJ18LDA.9 • 11208 • 10/2019
1. Application
20V Lithium-Ion Multi-Purpose Saw
2. Package Content List
First time users or inexperienced operators pay particular attention to the
operation of the 20V Lithium-Ion Multi-Purpose Saw, including details of
starting and stopping and correct use of the 20V Lithium-Ion Multi-Purpose
Saw on pages 18-20, as well as the maintenance instructions on pages 21.
Intended use of 20V Lithium-Ion Multi-Purpose Saw (battery / charger not included)
NOTE: This product is for private domestic DIY use only. It is not suitable for
commercial or trade use.
This 20V Lithium-Ion Multi-Purpose Saw is functioned as a combination of
jigsaw and reciprocating saw. It is intended for sawing wood, plastic, metal
and building materials while resting rmly on the workpiece. It is suitable
for straight and curved cuts.
The Lithium-Ion Multi-Purpose Saw is to be used only for its prescribed
purpose. Any other use is deemed to be a case of misuse.
• 1 x 20V Lithium-Ion Multi-Purpose Saw
• 1 x 120 mm Wood cutting blade
• 1 x 85 mm Metal cutting blade
• 1 x 85 mm Aluminium cutting blade
• 1 x Carry bag
• 1 x Instruction Manual
• 1 x Warranty Card
Remove all packing materials
Ensure all parts on the contents
list are present
Check the appliance, and all
accessories for transportation
damages
WARNING! Please read and understand this instruction manual
before use and keep it for your future reference. Your product
should only be passed on together with this instruction manual.
WARNING! To reduce risk of injury, only use ALDI 20V Li-Ion Xnity
Plus battery packs. Other type of battery packs may burst causing
personal injury and damage. The battery pack must be recharged
only with an ALDI 20V Li-Ion Xnity Plus battery charger.
6
6
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
CSJ18LDA.9 • 11208 • 10/2019
3. Parts description
1. Motor cover
2. Pivot release lever
3. Hand grip area
4. Lock-o button
5. Battery release button*
6. Battery pack*
7. On/o switch
8. Base plate
9. Foot plate
10. Blade
a. 120 mm Wood cutting blade
b.
85 mm Metal cutting blade
c.
85 mm Aluminium cutting blade
11. Blade holder
12. Protection nger
13. LED work light (See Fig. G)
* Battery and charger shown only for illustrative purposes. Battery and
Charger not included with this saw.
11
9
12
6
7
10c
10b
10a
8
1 2 3 54
10
7
7
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
CSJ18LDA.9 • 11208 • 10/2019
4. Description of symbols
The instruction manual, rating plate, or on the product itself, may
show these symbols. These represent important information about
the product or instructions on its use.
To reduce the risk of injury, user must read instruction manual
Warning
Wear ear protection
Wear eye protection
Wear breathing protection
Conforms to relevant standards for electrical safety and
electromagnetic compatibility.
60 Months Warranty
60
8
8
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
CSJ18LDA.9 • 11208 • 10/2019
5. General safety warning
General Power Tool Safety Warnings
WARNING Read all safety warnings, instructions,
illustrations and specifications provided with this power
tool.
Failure to follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless) power
tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is earthed or
grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric
9
9
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
CSJ18LDA.9 • 11208 • 10/2019
shock.
d) Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away from
heat, oil, sharp edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension
cord suitable for outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source and/
or battery pack, picking up or carrying the tool. Carrying
power tools with your finger on the switch or energising power
tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the
power tool on. A wrench or a key left attached to a rotating
part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery.
10
10
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
CSJ18LDA.9 • 11208 • 10/2019
Keep your hair and clothing away from moving parts. Loose
clothes, jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can
reduce dust-related hazards.
h) Do not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool safety
principles. A careless action can cause severe injury within a
fraction of a second.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the job
better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from the
power tool before making any adjustments, changing
accessories, or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power tools
are dangerous in the hands of untrained users.
e) Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the power
tool’s operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean. Properly maintained
17
17
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
CSJ18LDA.9 • 11208 • 10/2019
Fully insert the blade into the blade holder (11) slot with blade
teeth facing downwards to the base plate (8) of the saw.
3) Release the blade holder (11), and it will self-rotate back to
clamp the blade (10) tightly. Push the blade (10) to ensure it is
locked in position. (See Fig. D2)
NOTE: When using RECIPROCATING SAW MODE, the blade (10)
teeth face downwards to the base plate (8) of the saw as shown in
Fig. D3.
D1 D2 D3
1
2
——Removing the saw blade (10)
WARNING! The blade (10) may be spring ejected so
protect your eyes.
To remove a blade (10), hold the blade (10) and rotate the blade
holder (11) anti-clockwise, remove the blade (10) from the blade
holder (11) slot and then release the blade holder (11). (See Fig. D4)
D4
1
2
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Workzone CSJ18LDA.9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Workzone CSJ18LDA.9 in the language / languages: English as an attachment in your email.

The manual is 3,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info