724628
7
Zoom out
Zoom in
Previous page
1/19
Next page
AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com
1300 889 028 (toll free) MODEL No.: CS20V • 63350 • 01/2019
AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com
1300 889 028 (toll free) MODEL No.: CS20V • 63350 • 01/2019
12 13
Additional safety rules for circular saws
WARNING! The warnings, precautions, and instructions discussed in
this manual cannot cover all possible conditions and situations that
may occur.
The operator must understand that common sense and caution are factors
which cannot be built into this product, but must be supplied by the operator.
c. Adjust the cutting depth to the thickness of the workpiece. Less than
a full tooth of the blade teeth should be visible below the workpiece.
DANGER
a. Keep hands away from cutting area and the blade.
If both hands are holding the saw, they cannot be cut by the blade.
b. Do not reach underneath the workpiece. The guard cannot protect you
from the blade below the workpiece.
h). Keep handles and grasping surfaces dry, clean and free from oil and
grease. Slippery handles and grasping surfaces do not allow for safe
handling and control of the tool in unexpected situations.
5) Battery tool use and care
a). Recharge only with the charger specied by the manufacturer.
A charger
that is suitable for one type of battery pack may create a risk of re when
used with another battery pack.
b). Use power tools only with specically designated battery packs.
Use of
any other battery packs may create a risk of injury and re.
c). When battery pack is not in use, keep it away from other metal objects,
like paper clips, coins, keys, nails, screws or other small metal objects,
that can make a connection from one terminal to another.
Shorting the
battery terminals together may cause burns or a re.
d). Under abusive conditions, liquid may be ejected from the battery; avoid
contact. If contact accidentally occurs, ush with water. If liquid contacts
eyes, additionally seek medical help.
Liquid ejected from the battery may
cause irritation or burns.
e). Do not use a battery pack or tool that is damaged or modied.
Damaged
or modied batteries may exhibit unpredictable behaviour resulting in re,
explosion or risk of injury.
f). Do not expose a battery pack or tool to re or excessive temperature.
Exposure to re or temperature above 130 °C may cause explosion.
g). Follow all charging instructions and do not charge the battery pack or
tool outside the temperature range specied in the instructions.
Charging improperly or at temperatures outside the specied range may
damage the battery and increase the risk of re.
6) Service
a). Have your power tool serviced by a qualied repair person using only
identical replacement parts.
This will ensure that the safety of the power
tool is maintained.
b). Never service damaged battery packs.
Service of battery packs should
only be performed by the manufacturer or authorized service providers.
f. When ripping always use a rip fence or straight edge guide. This
improves the accuracy of cut and reduces the chance of blade binding.
g. Always use blades with correct size and shape (diamond versus
round) of arbour holes. Blades that do not match the mounting
hardware of the saw will run o-centre, causing loss of control.
h. Never use damaged or incorrect blade washers or bolt. The blade
washers and bolt were specially designed for your saw, for optimum
performance and safety of operation.
d.
Never hold the workpiece in your hands or across your leg while cutting.
Secure the workpiece to a stable platform. It is important to support the
work properly to minimise body exposure, blade binding, or loss of control.
e.
Hold the power tool by insulated gripping surfaces, only when
performing an operation where the cutting tool may contact hidden
wiring or its own cord. Contact with a "live" wire will also make exposed
metal parts of the power tool "live" and could give the operator an electric shock.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Workzone CS20V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Workzone CS20V in the language / languages: English as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info