781886
14
Zoom out
Zoom in
Previous page
1/20
Next page
18 AFTER SALES SUPPORT
support@scheppach.com.au 1300 855 831
MODEL: AB1900 PRODUCT CODE: 61755 08/2018
AUS
Maintenance AB1900
IX. MAINTENANCE
m Warning! Always pull out the mains power plug before starting any cleaning
work.
m Warning! If the supply cord of this power tool is damaged, it must be replaced by
a specially prepared cord available through the service organization.
Cleaning
Disconnect the mains plug, and wait until the rotating tool stands still. All protection
and safety devices must be immediately re-installed once the repair and
maintenance work is completed. The built-in ball bearings are maintenance-free.
Recommendations:
Keep all safety devices, air vents and the motor housing free of dirt and dust
as far as possible. Wipe the equipment with a clean cloth or blow it with com-
pressed air at low pressure.
We recommend that you clean the device immediately each time you have n-
ished using it.
Clean the equipment regularly with a moist cloth and some soft soap. Do not
use cleaning agents or solvents; these could attack the plastic parts of the
equipment. Ensure that no water can seep into the device.
Carbon brushes
In case of excessive sparking, have the carbon brushes checked only by a qualied
electrician. Important! The carbon brushes should not be replaced by anyone but
a qualied electrician.
Check the oil level (Fig. 1)
Check the oil level before using the machine. Place the machine on the oor with
the tool mounting pointing downwards. The oil must be at least above at the middle
of the inspection window (6). Changing the oil: The oil should be changed after
around 40-50 hours of use. Recommended oil: 25ml SAE 15W/40 or an alternative
of the same quality.
Oil change (Fig. 1)
Switch off the machine and pull the mains plug out of the socket.
Remove the inspection window (6) with a screwdriver (not included) and drain the
oil. To prevent the oil from running out in an uncontrolled manner, hold a small metal
chute under the opening and collect the oil in a vessel until it has fully drained out of
the machine.
Important: The waste oil must be disposed of in the appropriate collection point
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Workzone AB1900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Workzone AB1900 in the language / languages: English as an attachment in your email.

The manual is 2.03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info