724625
15
Zoom out
Zoom in
Previous page
1/16
Next page
24V Lithium-ion Cordless Drill with Hammer Action
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028
MODEL: №. 2024001 • 02/2019 • 63524
(toll free)
AFTER SALES SUPPORT
(toll free)
e-mail: info.aldi@positecgroup.com1300 889 028
24V Lithium-ion Cordless Drill with Hammer Action
MODEL: №.2024001 • 02/2019 • 63524
26 27
Trouble Shooting Specications
Specications
Motor: 24 V
Low speed:
n
0
-Lo = 0 – 400 min-
1
High speed: n
0
-Hi = 0 – 1550 min-
1
Impact Frequency: 0-6,000 / 0-22,500 BPM
Drill/driver diam Ø: - Wood 30 mm
- Steel 13 mm
- Non aggregate materials 13mm
Chuck: 13 mm Keyless
Battery 2024001-BAT: 24 V
1.5Ah/Li-Ion
Charger Adaptor: Model: 2024001-CBA
Input: 100-240V~ 50-60Hz 0.5A
Output: 26.0 V , 0.45A
Plug Pack Charger: Model#: IVP 2600-0450WS
Charging time: Ready for use in 3-5 Hours
Product Dimensions: 220mm x 225mm x 75mm (L x W x H)
(Drill/driver with battery pack tted)
Your 24V Lithium-Ion Drill with Hammer Function product complies
with the following Standards:
Certication Standard Directive
CE-MD&GS EN 60745-1:2009+A11:2010; Directive 2006/42/EC
EN 60745-2-1:2010
CE-EMC (Machine) EN 55014-1:2006+A1+A2, Directive 2014/30/EU
EN 55014-2:2015
CE-EMC EN 55014-1:2006+A1+A2, Directive 2014/30/EU
(Battery pack & Charger) EN 55014-2:2015,
EN 61000-3-2:2014,
EN 61000-3-3:2013
Variance AS/NZS 60745.1:2009;
AS/NZS 60745.2.1:2009
Charger:
Safety Report/s: AS/NZS 60335.2.29 :2009 Inc A1-2
Certication SAA-141627-EA
EMC EN55014-1+A1:2009+A2:2011
Meps AS/NZS4665.1:2005+A1:2009
How do I select hammer function?
Rotate the function selection collar (3) until the Hammer symbol aligns with the triangular
indicator.
How do I select drill function (Non Hammer)?
When using the drilling function the torque control has no eect to the output of the
drill. The drill function (15) is used when using the drill to drill holes in metal, non ferrous
material, wood, plastic and similar materials. Rotate the function selection collar (3) so
the symbol of the drill bit (15) aligns with the triangular indicator on the top of the drill
housing.
How do I select screw / driver function?
Rotate the function selection collar (3) so to align the screw symbol (14) with the triangular
indicator on the top of the drill housing. To adjust the torque setting, rotate the torque
setting collar (2). The higher the number, the higher the output torque. Align the required
torque setting number with the triangular indicator on the top of the drill.
Torque setting is 11.
What is the function of the Forward / Reverse switch?
This switch (6) will allow you to change the direction of the motor while the trigger switch
is not depressed.
Drill/driving uses the forward mode. The reverse mode is intended for the removal of
screws and assisting to remove jammed drill/driver bits.
What do I do if I have an issue with my drill?
If you have any issues with your drill/driver, please contact our Customer Service line on
1300 889 028.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Workzone 2024001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Workzone 2024001 in the language / languages: English as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info