Manual Worcester Greenstore Ground Source (page 11 of 28) (English)

809329

Zoom out

Zoom in

1/28

SETTINGS

6 720 802 172 (2012/06) 11

12.4 OPERATING MODES

•With electric additional heat; the electric additional heat is

permitted to work at the same time as the heat pump to meet the

demand, when the heat pump cannot meet it by itself. Alarm mode,

Extra hot water and Hot water peak also activate the additional heat.

•With mixed additional heat (option); mixed additional heat which is

permitted to work at the same time as heat pump. The additional heat

is also used during alarm operation.

A hot water electric heater is required for production of extra hot

water and hot water peak. In this case, the electric additional heat in

the heat pump is disabled.

13 SETTINGS

13.1 MODE BUTTON FUNCTIONS

By pressing , the following functions can be used directly:

•Room temperature normal / Temperature increase/decrease

•Party

•Holiday

•Extra hot water duration

> Room temperature normal / Temperature increase/decrease

Here, temperature changes for Circuit 1 can be made. If this circuit is

equipped with a room temperature sensor, the display shows Room

temperature normal, otherwise Temperature increase/decrease is

shown.

▶ Use this function to simply increase or decrease the heat when there

are no room controllers.

– – gives approx. 1 °C lower room temperature.

– gives approx. 0.5 °C lower room temperature.

+ gives approx. 0.5 °C higher room temperature.

++ gives approx. 1 °C higher room temperature.

> Party

Party mode means that a running room program is stopped during the

set time in order to avoid a temperature drop.

>> Number of hours

▶ Select the number of hours that party mode should be active for.

The function starts immediately on all activated circuits.

>> Circuit 1

>> Circuit x

▶Select Yes to enable party mode.

Party mode can be enabled for each installed circuit. The menu is

displayed only if more than one circuit is installed.

>> Deactivate party mode

▶Select Yes to disable party mode on all activated circuits.

The heat pump returns to program mode.

The menu is displayed only if party mode is active.

> Holiday

The same functions are included here as in the Holiday

menu ( Chapter 13.4).

> Extra hot water duration

▶ For a description of setting Extra hot water

(Chapter 13.3).

13.2 ROOM TEMPERATURE

Press the button in the standard display to open the main menu.

Select Room temperature to adjust the heating.

The following options are available under Room temperature:

•Circuit 1 Heating

•Circuit 2, 3...

•General

> Circuit 1 Heating

>> Heat curve

The heat curve constitutes the basis for the control unit's control of the

temperature on the heating water to the circuit and indicates how high it

needs to be in relation to the outdoor temperature. The control unit

increases the temperature of the heating water when the outdoor

temperature drops. The temperature of the heating water out to the

circuit, i.e. the flow temperature is measured by sensor T1 for circuit 1

(full name E11.T1) and sensor T1 for circuit 2 (full name E12.T1).

The Multi module accessory is required for mixed

additional heat and hot water electric heater.

The button can be used to change the language of

the control unit.

▶ Hold down the button for at least five seconds

in the initial menu and then select language.

Factory setting 20.0 °C

Lowest value 10.0 °C

Highest value 35.0 °C

Table 4 Room temperature, normal

Factory setting =

Alternative – – , – , =, +, ++

Table 5 Room temperature increase/decrease

It always takes some time for a change of a heating

setting, e.g. an increase or decrease in room

temperature, to apply. The same applies in the event of a

quick change of the outdoor temperature. This is why

you should always wait for at least 24 hours before

making a new change.

Factory setting 0h

Lowest value 0h

Highest value 99h

Table 6 Party duration

Factory setting No

Alternative No/Yes

Table 7 Enable party mode

Factory setting No

Alternative No/Yes

Table 8 Deactivate party mode

Factory setting 0h

Lowest value 0h

Highest value 48h

Table 9 Extra hot water duration

After a period with blocked hot water production, e.g.,

holiday, it is recommended to enable the extra hot water

function so as to eliminate bacteria and quickly reach the

correct hot water temperature.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Worcester Greenstore Ground Source in the language / languages: English as an attachment in your email.

The manual is 3.44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Worcester Greenstore Ground Source Manual

Product: