809328
6
Zoom out
Zoom in
Previous page
1/12
Next page
PREPARING THE HYBRID SYSTEM FOR USE
6 720 803 688 (2012/11)6
3 PREPARING THE HYBRID SYSTEM FOR USE
3.1 CHECKING THE OPERATING PRESSURE OF THE
HEATING SYSTEM
Regularly check the operating pressure to ensure that the heating
system remains operational.
3.2 TOP UP THE HEATING SYSTEM
Topping up heating water is different for individual heating systems.
Therefore, ask your installer to advise you accordingly.
The maximum pressure of 3 bar at the highest heating water
temperature must not be exceeded (safety valve in the condensing
boiler opens).
3.3 OVERVIEW OF THE FW200 PROGRAMMING UNIT
The hybrid control module regulates the times the air to water heat pump
and the condensing boiler are in use, subject to the parameters entered
into the FW200.
Fig. 4 FW200 programming unit
Observe the information on the required steps in the
operating instructions of the separate components.
Generally, the operating pressure is 1 to 2 bar. Should a
higher operating pressure be required, refer to your
heating contractor.
The separate operating instructions of the
corresponding condensing boiler includes information
on the steps required.
The hybrid system is regulated by means of the weather-
compensated FW200 programming unit.
912
h
15
18
21
24
h
3
6
6 720 613 572-01.1O
3
34
1
menu info
1
2
35
6
7
8
4
Keyboards
1Turning the selector in + direction: Selects menu/
information above or increases setting value
Turning the selector in direction: Selects menu/
information below or decreases setting value
Pushing the selector : Opens menu
or confirms setting/value
Switches heating circuit
2Mode selector for heating circuits:
Automatic mode
Continuous Comfort
Continuous Economy
Continuous Frost
3button:
In order to bring forwards the next switching time and associated
operating mode
= Comfort
= Economy
= Frost
for the heating circuit to the current time.
4 button: In order to activate DHW heating immediately. The
DHW cylinder is heated to the desired temperature for 60 minutes
or, with combination boilers, comfort mode is activated for 30
minutes. If the ECO button is active for combi boilers, the
button has no function.
5 button: Open/close menu
Open INSTALLER SETTINGS: Hold down for approx. 3 seconds
6 button: Display values
7Key : Delete/reset value
8Key : Return to next menu level up
To make the further description easier
controls and operating modes are sometimes only
depicted with symbols, e.g. or .
menu levels are separated by the > symbol, e.g.
Holiday>Start.
advance
advance
advance
menu
info
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worcester Greenstar Plus Hybrid at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worcester Greenstar Plus Hybrid in the language / languages: English as an attachment in your email.

The manual is 1.24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info