809296
25
Zoom out
Zoom in
Previous page
1/36
Next page
256720819898 C 11/2017
CHIMNEY CLEANING
The chimney should be swept at least twice a year. It is important
that the ue connection and chimney are swept prior to lighting up
after a prolonged shutdown period. If the stove is tted in place
of an open re then the chimney will require sweeping after a
month of continuous operation. This is a precaution to ensure that
any “softer” deposits left from the open re usage have not been
loosened by the higher ue temperatures generated by the closed
stove. In situations where it is not possible to sweep through the
stove the installer will have provided alternative means, such as a
soot door. After sweeping the chimney the stove ue outlet and the
ue pipe connecting the stove to the chimney must be cleaned with
a ue brush.
PERIODS OF PROLONGED NON-USE
If the stove is to be left unused for a prolonged period of time then
it should be given a thorough clean to remove ash and unburned
fuel residues. To enable a good ow of air through the appliance
to reduce condensation and subsequent damage, leave the air
controls fully open.
GLASS
Inspect and clean the glass regularly in order to detect any
cracks. If you spot one, turn the stove off immediately.
Do not abuse the glass door by striking or slamming shut.
Do not use the stove if the glass is broken.
If the glass on your stove breaks, replace only with the glass
supplied from your stove dealer. Never substitute other materials
for the glass.
Never wash the glass with a product that may scratch. Use a
specialized product, available in the stores where multifuel
stoves are sold. The glass should be washed only when cold. Do
not clean hot glass.
To replace damaged door glass follow these steps:
Open door and lift free of hinge blocks.
Position the door face down on a soft at surface so as to
protect the paint work and glass.
Take off the glass clamp and eight (8) screws and washers.
Remove glass and dispose of properly.
When replacing the glass, you should change the glass gasket
to make sure you keep it sealed.
To help with future removal of screws before reinstalling the
glass clean the screws with light oil and coat with a high
temperature anti-seize grease.
Fit the new glass sealing rope onto the glass clamp.
Carefully wrap glass sealing rope around the sides and bottom
edges of the glass.
Attach the glass sealing rope to the top and side edges of the
glass.
Position the glass clamp into position and reinsert the
previously removed screws. Evenly tighten the screws until the
glass is held securely. Do not overtighten.
GASKETING
It is recommended that you change the door gasket (which makes
your stove door air tight) once a year, in order to ensure good
control over the combustion, maximum efciency and security. To
change the door gasket, simply remove the old one. Carefully clean
the available gasket groove, apply a high temperature silicone sold
for this purpose, and install the new gasket available from your
installer or the manufacturer. You may light up your stove again
approximately 24 hours after having completed this operation.
PAINT
Only clean your stove with a dry soft cloth that will not harm the paint
nish. If the paint becomes scratched or damaged, it is possible to
give your multifuel stove a brand new look, by repainting it with
a 649°C heat resistant paint, available from your installer or the
manufacturer. For this purpose, simply scrub the surface to be
repainted with ne wet/dry emery paper, clean it properly, and apply
thin coats (2) of paint successively.
REMOVING LOG GUARD
Lift the log guard away from the supporting brackets and rotate to
clear the sides of the door opening.
WARNING: Never operate the stove without
a gasket or with a broken one. Damage to the
stove or even house re may result.
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
WARNING: Make sure the stove is fully cooled
before attempting to remove any part of the
stove.
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
USER INSTRUCTION
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worcester-Bosch Greenstyle Hanbury at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worcester-Bosch Greenstyle Hanbury in the language / languages: English as an attachment in your email.

The manual is 9.09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info