809350
38
Zoom out
Zoom in
Previous page
1/48
Next page
38
Energy saving tips
Sense ll – 6 720 812 775 (2014/10)
Menu: Energy consumption
This menu is only available if no cascade module (e.g. MC 400)
is installed, and only for certain types of heat source. The
information available under the individual menu items are
dependent from the installed heat source.
7 Energy saving tips
Economy mode
Use the time program by activating automatic mode. Set
the required room temperatures for the heating and
setback modes in accordance with your personal
temperature preferences. Adjust the time program to suit
your lifestyle.
Heating mode = Normal heating
Setback mode = Active living, away from home or
asleep.
Set the thermostatic valves in all rooms so that the required
room temperatures can be achieved. Raise the
temperatures for the operating modes only if the required
room temperature is not achieved after a prolonged period.
If the controller is installed in your living space, it can
capture the room temperature to optimise control
accuracy if set up accordingly. Keep the controller away
from external heat sources (e. g. sun light, gas/electric
heater etc.). Otherwise undesirable fluctuations of the
room temperature may result.
Never position large objects such as a sofa immediately in
front of radiators (maintain a clearance of at least 50 cm).
Otherwise, the heated air cannot circulate and heat the
room adequately.
If you reduce the room temperature by 1 K (1 °C), you can
save up to 6 % energy.
However, allowing rooms that are heated on a daily basis to
drop down to below + 15 °C is not recommended. That
would permit the walls to cool down too much. During the
heat-up phase, the ambient climate would be disturbed by
the cool walls that would still radiate cold. If you then raise
the room temperature further, more energy would be spent
than with a regular supply of heat.
With good heat insulation in your building, it is possible that
after a heating phase the desired room temperature for the
setback mode will not be reached. Nevertheless,
energy is being saved as the heating system stays switched
off.
You save further energy if you set the switching time for the
setback mode earlier.
DHW heating on demand
If the heating periods and the times at which hot water is
required are closely aligned, use the time program for DHW
heating in automatic mode as well.
Set the DHW temperature to as low as possible. This saves
a lot of energy without noticeably impairing DHW
availability and comfort.
Menu item description
24h: gas heating Energy in the form of gas consumed for
heating within the last 24 h
24h: elec. heating Energy in the form of current
consumed for heating within the last
24 h
24h: gas DHW Energy in the form of gas consumed for
DHW heating within the last 24 h
24h: elec. DHW Energy in the form of current
consumed for DHW heating within the
last 24 h
30d: gas heating Energy in the form of gas consumed for
heating within the last 30 days on a
daily average
30d: elec. heating Energy in the form of current
consumed for heating within the last
30 days on a daily average
30d: gas DHW Energy in the form of gas consumed for
DHW heating within the last 30 days
on a daily average
30d: elec. DHW Energy in the form of current
consumed for DHW heating within the
last 30 days on a daily average
Table 38 Data relating to energy consumption
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worcester-Bosch Greenstar Sense ll at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worcester-Bosch Greenstar Sense ll in the language / languages: English as an attachment in your email.

The manual is 4.46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info