809350

Worcester-Bosch Greenstar Sense ll Manual

17
Zoom out
Zoom in
Previous page
1/48
Next page
17
Working with the main menu
Sense ll – 6 720 812 775 (2014/10)
5.1 Main menu summary
If two or more heating circuits or two or more DHW systems are
installed in the system, an additional selection must be made in
some menus:
▶ Turn the selector to select the heating circuit or DHW
system for which the settings are being changed.
▶ Press the selector to display the menu.
Menu Purpose of the menu page
Heat appliance Switch heat source to emergency operation. Switch heating and DHW heating in or off and set
the maximum flow and DHW temperature. Only available with certain types of heat source if
no cascade module (e.g. MC 400) is installed.
18
Heating Change the room temperatures and time program for the heating system permanently. 18
Temperature
settings/Setback
threshold
Set the desired room temperature that can be assigned to the periods in the time program
with heating and setback mode or the setback threshold in case of freely adjustable
temperatures for switching times.
18
Operating
Mode1)
1) This menu item is only available if control type Constant is set for a heating circuit.
Switch a constant heating circuit on or off and activate a time program of a constant heating
circuit (e.g. swimming pool or ventilation unit).
19
Time program Switch between heating and setback mode or any temperatures at defined times of day and
on defined days of the week (automatic mode). Separate time programs can be used for DHW
and circulation. Time programs are renamed in this menu.
19
Start opt. time
prog.
The time program for the heating system is optimised automatically for increased comfort by
bringing forward the switching times. If you do this, the required room temperature will be
reached in advance of the switching time. Recommended for high levels of comfort
25
Sum./wint.
changeover
Switch automatically between summer mode (heating off) and winter mode (heating on)
(subject to outside temperature).
25
Rename heating
circuit
Change the name of the heating circuits so that the heating circuits are easier to assign (e.g.
heating circuit 1 – ground floor; heating circuit 2 – workshop; heating circuit 3 – swimming
pool etc.).
23
DHW Change the water temperatures and time program for DHW heating permanently. 25
Heating once Set temperature and duration for once-only cylinder charging (= immediate DHW heating)
and start once-only cylinder charging.
26
Temperature
settings
Set water temperatures for different operating modes which can be assigned to the time
program.
26
Time program Switch between DHW, reduced DHW heating and no DHW heating operating modes at defined
times of day and on defined days of the week (automatic mode).
26
Circulation Set time program for DHW circulation so that DHW is available without delay at the draw-off
points.
28
Thermal
disinfection
Heat up DHW to kill off pathogens. 29
Rename DHW
system.2)
2) This menu item is only available in installations with two DHW systems.
Change the name of the DHW systems so that they are easier to assign. 23
Holiday Settings for operating the system during prolonged periods of absence (holiday program). 30
Settings Change general settings such as time, date, display contrast etc. 33
Hybrid system If a hybrid system is installed, adapt the settings for its component parts. If a hybrid system is
not installed, this menu is hidden disabled.
34
Table 11 Main menu summary
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worcester-Bosch Greenstar Sense ll at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worcester-Bosch Greenstar Sense ll in the language / languages: English as an attachment in your email.

The manual is 4.46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info