809234
9
Zoom out
Zoom in
Previous page
1/24
Next page
9
Controls
Greenstar i System ErP - 6 720 813 281 (2014/09)
3.1.4 Boiler frost protection
If you are leaving your property unoccupied during cold weather, please leave your programmer on constant and your room
thermostat set to 15°C.
If the temperature within the boiler falls below 8°C the pump will run to circulate water and prevent the system freezing.
If the temperature does not rise to 9°C within 30 minutes of the pump operating, the boiler will fire up to provide heat to
bring the temperature up.
If the temperature within the boiler falls below 5°C the boiler will fire immediately, bringing the boiler temperature up to 1C
to avoid the possibility of the system freezing.
This process will be repeated until such time that the boiler temperature does not drop below 5°C.
3.1.5 No Integral diverter valve fitted: Cylinder temperature adjustment
If a heat demand occurs, the radiator and flame symbols will be displayed
If the domestic hot water control is adjusted or the “eco” button is pressed:
N/A is displayed briefly.
This function will not affect the cylinder hot water temperature.
To adjust the water temperature of the cylinder:
Adjust the cylinder temperature thermostat on the cylinder.
3.1.6 Optional integral diverter valve kit fitted: Setting the cylinder hot water temperature.
1. Turn the hot water temperature control knob to the desired level between 40 and 70°C, this will be shown on the digital display.
Fig. 2 Hot water temperature
The tap symbol will be displayed to confirm that the hot water is being adjusted.
After five seconds the boiler display will return to the default screen.
NOTICE: The boiler must be switched on with a gas supply in order for the built -in auto frost protection to work as
described.
An internal or external timer/programmer coupled with the optional integral diverter valve kit with cylinder
temperature sensor is required to be able to set the hot water temperature.
If an FR110, FW100 and Sense II controller is also fitted, in conjunction with the diverter valve, they assume control
over the delivered temperatures, reducing the effect of the temperature controls. Set both to maximum.
An external timer may be fitted instead of an internal timer.
max
min
2
3
1
04
bar
1
ok
eco
reset
e
max
min
°C
°F
°C
°F
1.
6720807727-03.1Wo
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worcester-Bosch Greenstar i System Compact at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worcester-Bosch Greenstar i System Compact in the language / languages: English as an attachment in your email.

The manual is 2.88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info