809227

Worcester-Bosch Greenstar Heatslave II Internal Manual

6
Zoom out
Zoom in
Previous page
1/16
Next page
6
Using your boiler
Greenstar Heatslave II 2022+ – 6 721 843 979 (2022/01)
3.2 Operating the boiler
3.2.1 Switching the boiler on/off
▶ To switch on the boiler; turn on the water, oil and electricity
supply to the boiler.
▶ Check the programmer/timer is correctly configured and is
set to ON.
▶ Set the room thermostat to the desired setting.
▶ Open and set thermostatic radiator valves as required.
▶ Turn the boiler controls to the required setting.
▶ To switch off the boiler; turn the programmer/timer to OFF
for heating and hot water.
3.2.2 Setting central heating temperature
1. Turn the central heating temperature control knob to the
desired flow temperature between 50 and 82°C, this will
be indicated on the digital display. This is not the room
temperature but the flow temperature through the
radiators.
2. The radiator symbol will be displayed to confirm that the a
central heating setting is being changed.
3. The value is displayed during this process, press to
exit or after five seconds of inactivity the boiler display will
return to the default screen.
Fig. 2
Display symbols
Screen display Description Explanation
All possible screen symbols (including
greyed out symbols)
All possible screen symbols are displayed
briefly during start up. The greyed out
symbols are not required for the
operation of this appliance.
Numerical display Displays a temperature setting or boiler
status code.
Text display Displays ECO or Alert code
Hot water Displays during a hot water demand and
when the heat store is reheating.
Central heating Displays during central heating demand.
Alert Displays during a fault condition with
diagnostic and status code.
Service mode Displays when in the service menus.
°C Centigrade indication Displays next to temperature reading.
Confirmation Confirms a manual change.
Weather Compensation Displays only if Weather Compensation
sensor is fitted and is active.
ok
6 720 805 211-02.1TL
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worcester-Bosch Greenstar Heatslave II Internal at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worcester-Bosch Greenstar Heatslave II Internal in the language / languages: English as an attachment in your email.

The manual is 2.19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info