4
TECHNICAL INFORMATION
The Greenstar oil-fired boiler can provide both domestic hot
water and full central heating, with an output range from 12kW to
22kW (40,000 to 75,000 Btu/h). Domestic hot water must be
supplied via a conventional indirect hot-water system, utilising an
indirect double-feed cylinder.
The temperature control knob, overheat reset button and
water overheat/manual reset button are all located on the appliance
facia panel.
To remove the front panel, pull forward and lift away
TO START YOUR BOILER (See Fig. 1).
(a) Switch on the electrical mains supply to the boiler.
(b) Ensure that any external controls connected to the boiler, such
as a room thermostat, are on a high setting.
(c) If a programmer is fitted, set it to the correct time of day and
position the selectors to ON.
(d) Turn the thermostat control knob to the desired position (see
section Temperature Control).
ACCESSING YOUR BOILER
CONTROLS
HOW TO START YOUR
BOILER