809345

Worcester-Bosch Greenstar Comfort I RF - 2023 Manual

9
Zoom out
Zoom in
Previous page
1/20
Next page
9
Operation
Comfort I– 6720810964 (2017/02)
4Operation
The Programmer/Receiver is supplied with factory set default
ON and OFF times, for central heating (CH) and hot water
(HW), that are shown in the table below. These time settings
can be reset according to the homeowner’s requirements via
the User menu function on the Programmer/Receiver,
section 5.1. The times can be reset to the factory setting via
the User menu.
The Room thermostat displays the current room temperature
and is linked by an RF signal to the Programmer/Receiver.
4.1 Programmer/Receiver
During normal operation the display shows:
• the operational modes of the central heating and hot water,
either ON, OFF, AUTO, ONCE or ADV, press the Central
heating or DHW select button to choose either:
–ON = heating or hot water is permanently on
–OFF = heating or hot water is permanently off
–AUTO = programmed times for heating and hot water
–ONCE = heating or hot water is on from the first
programmed on time to the last programmed off time
• In the Auto mode, press the Advance button once to move
to the next on or off time, press for a second time to return
to the current programme
•the current time and day,
• am or pm for the 12 hour time format
• Graphical indication of the current time program, the black
markers indicate half hour time periods. The flashing black
marker indicates the current time position in the
programmed sequence, either in the ON or OFF period.
Fig. 10 Display elements
1. Central heating operational status
2. Current day
3. HW operational status
4. Current time
5. Graphical indication of the current time program
6. 24 hour time scale
7. Frost protection - displayed when boiler is set to minimum
8. Burner ON - display when boiler is heating
9. am or pm display - not displayed in 24 hour clock format
Pressing the knob once and releasing during an OFF period will
display the current temperature setting and when the next ON
time is scheduled. The example shown below indicates that the
Central heating is OFF and will not be ON again “until 16:30” (or
“until 4:30pm” in 12 hour format) and if the temperature drops
below 5°C the heating will come on. This setting is for frost
protection and the frost protection symbol will be displayed.
Fig. 11 Heating off
Pressing the knob once and releasing during an ON time will
display the current temperature setting and when the next OFF
time is scheduled. The example shown below indicates that the
Central heating is ON and will not be OFF again “until 22:30” (or
“until 10:30pm” in 12 hour format) and the temperature has
been set to 20°C.
Fig. 12 Heating on
06:30 08:30 16:30 22:30
CH ON OFF ON OFF
HW ON OFF ON OFF
6720810964-04.1Wo
23
4
5
1
pmam
6
9
8
7
6720810964-05.1Wo
pmam
6720810964-06.1Wo
pmam
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worcester-Bosch Greenstar Comfort I RF - 2023 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worcester-Bosch Greenstar Comfort I RF - 2023 in the language / languages: English as an attachment in your email.

The manual is 3.36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info