809346
18
Zoom out
Zoom in
Previous page
1/24
Next page
18
Room thermostat
Comfort I – 6720810964 (2014/07)
6.5 rF 1 Pair with other devices
Turn the knob to select rF 1 and press to enter the function
▶To Pair the devices, turn the knob to select A, pair this
programmer with the Room thermostat
Press the knob to start the pairing process, the timer has to
be in the same mode, page 14 Radio setting.
During the pairing process 0 flashes until the units
connected and then 1, 2 or 3 will be displayed flashing,
when the pairing is completed A is displayed.
Either wait 30 seconds and the display will revert to
displaying the current room temperature or to move to the
previous level, press the knob for more than three seconds.
To leave the menu and display current room temperature,
press the knob again until the three bars are displayed and
release the knob to display the current room temperature.
▶To Unpair (disconnect) the units, turn the knob to select d
Press the knob to start the unpairing (disconnection), a 1,
2 or 3 will be displayed flashing, when the unpairing is
completed a flashing 0 will be displayed and when the
process is complete, d is displayed
When the unit(s) have been unpaired or disconnected a
zero will be displayed indicating that no units are
connected.
Press the knob, for more than three seconds, to return to the
previous level, rF 1.
Press the knob until the three bars are displayed and release
the knob to return to the normal display i.e. the current room
temperature.
6.6 S 1 Software version
Turn the knob to select S 1
Press the knob to enter the software version function
The software version is displayed
Press the knob for more than three seconds to return to the
previous level
6.7 S 2 RF signal strength
Turn the knob to select S 2
Press the knob to enter the signal strength function
The signal strength is displayed a number 0 to 10
[0] no signal
[1-3] weak signal
[4-6] acceptable signal
[7-10] very good signal
Press the knob, for more than three seconds, to return to the
previous level.
Press the knob until the three bars are displayed and release
the knob to return to normal display.
The Programmer/Receiver and Room
thermostat are delivered together and are
factory paired, they will automatically
connect when they are switched on.
If the units have to be paired, all units must be
in the pairing mode to be connected, refer to
Sections 5.2 Radio settings to put the
Programmer/Receiver into the pairing mode.
6720810964-12.1Wo
6720810964-08.1Wo
6720810964-09.1Wo
6720810964-13.1Wo
6720810964-14.1Wo
6720810964-15.1Wo
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worcester-Bosch Greenstar Comfort I RF - 2014-2022 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worcester-Bosch Greenstar Comfort I RF - 2014-2022 in the language / languages: English as an attachment in your email.

The manual is 4.03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info