809346
14
Zoom out
Zoom in
Previous page
1/24
Next page
14
Programmer/Receiver settings
Comfort I – 6720810964 (2014/07)
5.2 Installer
These functions are only used by the installer/service engineer
and are useful during installation.
Press the menu button and return button for more than three
seconds to enter the Installer setting area of the programmer.
Five user icons are shown across the top of the display, plus the
sixth that is the Installer icon:
1. Heating
2. Hot water
3. Holiday
4. Info
5. Settings
6. Installer setting
Selections 1 to 5 are the same as the Programmer/Receiver
user menu, section 5.1.
Turn the knob to select the Installer icon and press the
knob to enter the function.
Fig. 14 Installer menu
Installer settings menu options
1. Reset all
2. Maintenance
3. System info
4. Radio settings
The menu options are displayed on the top line with flashing left
and right arrows heads, indicating that there are other menu
options available. Turning the knob will select each option in
turn, eventually returning to the first option.
1. Reset all
▶Press the knob and NO flashes
Turn the knob to select NO or YES
Press the knob to confirm, if YES is chosen all menus within
the Installer menu are reset back to default settings, four
bars progress across the display until the reset has taken
place,
if NO is chosen, no reset takes place
2. Maintenance
a. Fault history
–Cont. faults
b. Landlord func.
Maint. date
Maint. contact
a. Fault history
▶Press the knob and Cont. faults is displayed
Press the knob and the first of five faults is displayed with
the fault code and occurrence date. The fault screens can
be scrolled through using the knob. If no faults have
occurred, the text No fault will be displayed.
b. Landlord func.
This function is for social housing landlords only and enables a
maintenance/annual service date to be set.
The maintenance reminder message “Maintenance” is
displayed 30 days before the set date.
Along with the Maintenance message a contact telephone
number will be displayed.
The tenant should call this number to arrange a convenient date
for the service.
Landlords, call the Worcester Bosch technical support team for
instructions of how to reset the Maintenance message or
contact telephone number.
If the maintenance reminder message is not cleared or reset to
a later date, by the Service engineer, then 14 days after the
scheduled maintenance date the controller will limit the room
temperature set point to 18°C.
3. System info
Turn the knob to select System info
▶Press the knob and Install date flashes
▶Press the knob and the install date is displayed
Press the knob to return to Install date
Turn the knob to select SW controller
Press the knob to display the software controller version
Press the knob to return to SW controller
Press the return button to go back to System info
4. Radio settings - Pair/Unpair
6720810964-21.1Wo
pmam
23456
1
The Programmer/Receiver and Room
thermostat are delivered together and are
factory paired, they will automatically
connect when the system is switched on.
If the a units have to be paired, all units must be
in the pairing mode to be connected, refer to
section 6.5 to put the Room thermostat into
the pairing mode.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worcester-Bosch Greenstar Comfort I RF - 2014-2022 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worcester-Bosch Greenstar Comfort I RF - 2014-2022 in the language / languages: English as an attachment in your email.

The manual is 4.03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info